Jump to content
SAU Community

Recommended Posts

I've had a look back through some old pictures I have, Reece has been developing the car over quite a long period of time. It grew out of his old R33

See the bottom pictures

here - Winter street meet 2000

__________________________

The top left two picture show the 9.4 run at the idrag nats 2002 where he split the block...man that was an awesome run to watch!

Also middle row left, and bottom row right. A prize for anyone who can spot Ketzel from High Octane lurking in one of the other pictures!

Idrag nats here

GW

Originally posted by GTS-t VSPEC

I agree with RONIN, there is no need for snide comments.

I think the times both Reece and Mario have achieved are amazing. I just wonder what time they get without slicks and running Nitto's, like most do in Japan.

See'ya:burnout:

At this stage both cars are PROGTR specification which according to my learned friend = slicks and no road registration. RH9 = Treads and Street Rego.

:bonk:

Do we have an estimate of when the chequebooks will finish racing?

So what is the best time for an RH9 car in australia, the PROGTR times are fantastic but I like the though of a 9sec street registered car.

See'ya:burnout:

Originally posted by GTS-t VSPEC

Do we have an estimate of when the chequebooks will finish racing?

So what is the best time for an RH9 car in australia, the PROGTR times are fantastic but I like the though of a 9sec street registered car.

See'ya:burnout:

I don't know the rate of continental drift so I don't think the books will cross the quarter in our lifetime!

(Street GTR but some ran with slicks so not all are RH9 Cars as such)

Nissan GT-R

# State Driver Car Engine 1320ft MPH Track

1 S.A Keir Wilson R32 RB26DETT 3.0ltr 9.749 144.5 A.I.R

2 N.S.W Andrej Pavicevic R33 RB26DETT 2.7ltr 9.75 141 Heathcote

3 NSW Dominic Russo R32 RB26DETT 2.6ltr 10.55 130 Eastern Creek

4 QLD Mark Kaucic R32 RB26DETT 2.6ltr 10.63 136 Willowbank

5 S.A Danny V R32 RB26DETT 2.6ltr 10.81 130 A.I.R

5 NSW Jason De Grandis R34 RB26DETT 2.6ltr 10.81 136 Heathcote

6 S.A Kingsley Head R32 RB26DETT 2.6ltr 10.84 130 A.I.R

7 QLD Stefan Zelenak R33 RB26DETT 2.6ltr 10.86 129 Willowbank

8 QLD Ben Wooster

R32 RB26DETT 2.6ltr 11.138 128 Willowbank

9 QLD Theo Woollett R32 RB26DETT 2.6ltr 11.167 123 Willowbank

10 VIC Ross Wilson R32 RB26DETT 2.6ltr 11.17 127 Calder Park

NB: AFAIK at the time GTR700 ran 9.75 it was still eligible for Street...not worth betting life on though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...