Jump to content
SAU Community

Recommended Posts

I was reading in the WTB section, one of the guy's is after a Fuel Cap because of fumes leaking from the fuel lid...."sniffy" hit the nail on the head,,,there's probably nothing wrong with the cap at all,,, I have swapped 3 fuel caps off my wifes demos,,,still leaking.

It's more likely lazy Compliancers using silicone to seal the filler neck insert. I have the same problem and have been told to remove the insert and seal it properly using Sikaflex,,,,,.I'm wondering if anybody else has or had this problem and how they fixed it.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/8195-fuel-fumes/
Share on other sites

Yeah Dude

I have replied to that Post (couldn't help it).

The surround of my R33's tank cap was "held on" by 3 blobs of some adhesive that obviously wasn't doing the trick.

My wife had bought another petrol cap before we realised what the problem was.

I used a well known silicone sealer to fix the problem and have had no worries since. There shouldn't be too much fuel in contact with this area under normal circumstances.

The fault is, indeed, lazy compliance work.

Enjoy!

Link to comment
https://www.sau.com.au/forums/topic/8195-fuel-fumes/#findComment-118885
Share on other sites

Originally posted by elbee111

Yeah Dude  I have replied to that Post (couldn't help it).

Thanks,,,,Now I gotta go and delete it,,,,.

I'm thinking though,,,,there would be heaps of Imports suffering the same problem,,,.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/8195-fuel-fumes/#findComment-118941
Share on other sites

Guest KILLER-T

Yep i had the same problem with my car it wasn't so bad in winter but the first hot day we had i noticed a real strong fuel smell in the car.I went over the whole fuel system looking for leaks and the last thing i checked the fuel filler and what do u know it pulled out with no effort at all used some sicaflex to stick it back on and 1 year later still no fuel smells :uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/8195-fuel-fumes/#findComment-118954
Share on other sites

Guest ylwgtr

yeah i seen this lots of times....use sikaflex on the filler neck..that doesnt disolve.Also the filler neck may be hydrasized too much if it is justput a shite load of sikuntflex :P around the ulp insert and shove it in and clean it up with some thinners where the excess spulrts out.Get it while its wet tho o/wise youl have trouble getting it off.Dont screw the cap on at all or very loose untill it dries then you should have no probs

Link to comment
https://www.sau.com.au/forums/topic/8195-fuel-fumes/#findComment-118956
Share on other sites

Neil,

Yepp, mine is the same.

Sometimes I can get in the car and look in the side view miror and actually see the fuel fumes coming out !!!!

And after a long drive in hot weather the petrol cap will hiss for a while after I stop (Canberra people onthe last cruise to Corin Dam can confirm this !!!).

I have to get around to fixing it one day........ One day.......

J

Link to comment
https://www.sau.com.au/forums/topic/8195-fuel-fumes/#findComment-119143
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...