Jump to content
SAU Community

Gavin Woods for Rebuild?

knore

By knore,
in Queensland

 Share

Recommended Posts

knore Grand Master

knore

Posted
Posted

Hey Guys,

Been outta the loop for awhile cos the cars been off the road :D

Thinking about going the next step and getting some internal work done while my gearbox is rooted :(

Primarily thinking gavin woods because the main thing im looking for is QUALITY

Has anyone got engine internal work done at gavin woods?

Will be making the necessary phone calls etc once the money is there to be used but for the moment can anyone tell me if Gavin does the engine building themselves or contract to another place?

Also, who else can provide quality rebuilds including machining (ill be supplying most of the parts) in brisbane>?

Most likely looking to spend around 6k, something like;

Forgies + N1 rings, N1 bearings and reconditioned GTR conrods plus all the balancing and machining etc

To eventually mate with a 3037s @1.5bar + all supports :D

Any advise would be great, as im kinda throwing ideas around at the moment.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/82149-gavin-woods-for-rebuild/
Share on other sites
dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted

JHH for rebuild. At least talk to John at JHH, I dont have the number handy but it should be in the white pages. He is really quite good. But one thing LISTEN to him, do NOT say I am having this this and this. He knows what he is talking about. One case, the guy gave him cams, and well, dont do that when you have a 300zx, it costs a LOT of money to keep pulling the engine out, and putting it back.

But yeah, JHH for PM!

R32GTRANN Rookie

R32GTRANN

Posted
Posted
Hey Guys,  

Been outta the loop for awhile cos the cars been off the road :cheers:  

Thinking about going the next step and getting some internal work done while my gearbox is rooted :)  

Primarily thinking gavin woods because the main thing im looking for is QUALITY

Has anyone got engine internal work done at gavin woods?

Will be making the necessary phone calls etc once the money is there to be used but for the moment can anyone tell me if Gavin does the engine building themselves or contract to another place?  

Also, who else can provide quality rebuilds including machining (ill be supplying most of the parts) in brisbane>?

Most likely looking to spend around 6k, something like;

Forgies + N1 rings, N1 bearings and reconditioned GTR conrods plus all the balancing and machining etc  

To eventually mate with a 3037s @1.5bar + all supports :D  

Any advise would be great, as im kinda throwing ideas around at the moment.

Cheers!

IF THIS IS ANY HELP TO YOU I AM CURRENTLY GETTING MY ENGINE REBUILT AT TOTAL PERFORMANCE BY ANDREW. IT IS IN LAWRENCE DRIVE, NERANG. SHARING A SHOP WITH DYNO SOURCE. ALL HE EVER DOES IS REBUILD ENGINES FOR SKYLINES. HE HAS DONE A COUPLE OF GEARBOXES FOR OUR FRIENDS AND THEY WERE REALLY HAPPY WITH HIM.
knore Grand Master

knore

Posted
  • Author
Posted

Ok thanks for the replies

Can anyone give me an estimate on the labour/machining/balancing costs?

I was thinking about $2000

anyone thats done this tune in and give me some info :cheers:

Can the rb26 HKS 2.7L stroker kit be used on an rb25det block safely?

Squizz Grand Master

Squizz

Posted
Posted
IF THIS IS ANY HELP TO YOU I AM CURRENTLY GETTING MY ENGINE REBUILT AT TOTAL PERFORMANCE BY ANDREW. IT IS IN LAWRENCE DRIVE, NERANG. SHARING A SHOP WITH DYNO SOURCE. ALL HE EVER DOES IS REBUILD ENGINES FOR SKYLINES. HE HAS DONE A COUPLE OF GEARBOXES FOR OUR FRIENDS AND THEY WERE REALLY HAPPY WITH HIM.

I think you need a keyboard rebuild...

Russco Proficient

Russco

Posted
Posted

knore, John at JHH did my RB26 & it has performed flawlessly. Unlike many other "engine builders" all he does is rebuilds & machines engines, he is not a tuning shop that sub-contracts the work & puts on a mark-up. Have a look at some potential workshop/s & JHH's & you will probably see one with a lot of specialist machining equipment & one without. He does a stack of RB engines & other Jap engines including Colin Wilshire's 8sec Datson ute etc who also speak highly of him.

r33GTS-t-200kw Enthusiast

r33GTS-t-200kw

Posted
Posted

I have had this recently done to my RB25

bore and hone 20thou

replace all welsh plugs

complete balance

fix some minor block issues

reclaim some of the crank

linish crank

acip dip and clean

assembly

HEAD

full clean

reface valves, new seats, pressure test, resurface

and someother shit ive forgotten off my invoice for $2509.32 hahahaha

that was through a workshop in Cairns so i'd assume you get better prices down south just to give u an indication

dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted
knore, John at JHH did my RB26 & it has performed flawlessly. Unlike many other "engine builders" all he does is rebuilds & machines engines, he is not a tuning shop that sub-contracts the work & puts on a mark-up. Have a look at some  potential workshop/s & JHH's & you will probably see one with a lot of specialist machining equipment & one without. He does a stack of RB engines & other Jap engines including Colin Wilshire's 8sec Datson ute etc who also speak highly of him.

He also does the 'Jett racing' cars from memory. Few others. Daniel who is next door normally does a lot of the pulling out of the engines etc. Id recomend him highly for the 'mechanic' bit.

knore Grand Master

knore

Posted
  • Author
Posted

Ok thanks for the replies guys,

so nobody knows if gavin does the engine work himself?

ill havta make some phone calls but the only way im pouring money into this is if i trust the people 100% otherwise ill just put the new gearbox in my car, sell it and go for a GTR instead

knore Grand Master

knore

Posted
  • Author
Posted
1992-93 GTR are around low 20's landed ;) probably less stuffing around..

Yeah true that,

I was kinda under the guise of either turn current car into a monster or get a shitbox for awhile and save for something thats a big step up.

Still going to do some investigating, but might put new gbox in and front tyres just to see if the gtst will sell quickly, if so, guess its a pintara or magna to put around in for awhile :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ToothDR32
      $5 Clock upgrade for R32 GTR

      By ToothDR32 · Posted

      Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...