Jump to content
SAU Community

Recommended Posts

after 6 months mine died. Ended up end filter that was supplied with it ended up decaying, and sucking itself into the pump, until eventually it was pretty useless.. car would randomly stall, not start, etc. That is what I would say most likely caused the problem.. if not the pump just crapped itself.

try and not use the stock filter. But others have had random failures with them..

mine runs fine, no problems and very happy in fact.

you can re-use the stock sock filter just to be safe, though predator is the only person i've heard of who has experienced this problem before. I'm interested to hear who else is having problems with walbros, and who they bought them off if "plenty of people are haiving problems" with them.

Another note, there is a thread about someone on this forum who has been selling Walbro rip-off's(Cefiro_PWA) (which don't have proper model number & walbro logo & pat numbers stamped on them), be wary of them, as they are not the same quality as proper walbro's.

It's sticked in the for sale section / parts & acc classifieds fyi

My mates Walbro pump cacked it after about 10months (180sx). I also had a Walbro, however when my car was on the dyno one time my tuner told me that my car was leaning out and believed that it was the pump starting to fail, but im not 100% convinced that it was the pump. I replaced it with a Bosch 040

Im pretty sure though that my pump was a genuine Walbro as it had the emblem and serial number engraved on the pump.

There was a fair few copies going round though on NS.com

mine i am pretty positive is genuine walbro.. and like above had the proper markings I am pretty sure..

when i get around to it 2nd time around, I am either going GTR pump or Bosch.. I thought giving the walbro was worth a try at a bit of a cheaper price, but don't think I would do it again.

mine i am pretty positive is genuine walbro.. and like above had the proper markings I am pretty sure..  

when i get around to it 2nd time around, I am either going GTR pump or Bosch.. I thought giving the walbro was worth a try at a bit of a cheaper price, but don't think I would do it again.

I agree , you pay Peanuts ,ya get monkeys. Have been thru this Walbro scenario. Cost me money for a piece of snot!

Bought a more expensive Tommie, vehicle specific , will never cut corners again.

how can say that?

A walbro is not far off the price of a bosch unit.

So people arent cutting corners at all. Just the product is crap.

mine didnt come close to flowing what it said on paper. Changed to a bosch and the AFR's went ridiculously rich.

No more walbro for me either. Im just using it as a lifter pump

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back on topic for you for a post Will it be on pump or ethanol? 2025 Spec RB build: G30 660 .83 would be good  artec manifold turbosmart 45mm external gate 1000cc Injectors Kelford cams 264 and springs Pistons and rods for insurance Oil pump with billet gears Headdrain and all good oil mods Quality intercooler 3.5 inch dump pipe to decent exhaust Link plugin Ecu or what ever your tuning is comforatble with Bolt on Trigger Kit - Nzwiring kit is go to ARP Headstuds Quality headgasket quality fuel pump- a TI/walbro 525lph PWM would be the go Quality fuel reg Will be over $15K AUD Enjoy the noise of rb on gate at over 7400rpm. Start looking for gearbox conversions if your hard on the gear. Now I've been there and done that with rb powered street car (2007-2022) much prefer newer stuff. Anything 90's Japanese is not a great experience these days and highly over rated. My 2015 Brz with a heap of suspension mods is such a better car even with out the power of my old s chassis' even on track. If wanting to play light chassis and decent power for a  giggle a k swap 86/brz would be the go Check my old build for engine stuff I really need to pay attention to post 2016 BMW stuff but seem all very heavy 1600+kg  
    • I mean, the 240i is not a Supra... make it drop a few hundred kg, have a sportscar chassis, clearance for wheels etc... Maybe I want a hardtop Z40i XDrive or something :p I do agree with you though and have long said the B58 Supra/240i/340i/440i is the new R Chassis/JDM90's turbo rocket for mod lovers to ... not always appreciative response lol. Doesn't make it not true though.
    • I will do the build myself but I will be paying for the tune because I don't know how much about that and would rather it be done right and by a professional 
    • Will you build and tune it yourself or do you need to pay for labour? 
×
×
  • Create New...