Jump to content
SAU Community

Recommended Posts

hey all,

my new r32 gtr has tein coilovers, not sure what model, but there is the most frustratingly loud banging noise from the rear over every bump!

i have never had coilovers before and these came with the car so i dont know what to expect, the car is not excessively lowered, guards are about 2inches off the rubber (i imagine its set to stock ride height).

there appear to be no other suspension mods.

but this deep banging/bumping noise is worrying me, i have only had the car 1 day and the clutch has died so i havent had a chance to try and diagnose the problem.

any suggestions/thoughts would be great

cheers

dan

btw im 99% sure its the teins everything in boot (spacesaver and tools etc) is secured pretty well

Link to comment
https://www.sau.com.au/forums/topic/82497-seriously-loud-ride/
Share on other sites

before you go to all that expense does it sound like a "loose" bang or a tight one? I pulled the back seats out and stuff to find something floating around loose beneath the parcel shelf. might be worth a look if it's a "loose" bang

no its a tight bang, its a metallic sound, but not tinny, very solid. and can be pinpointed side from side if i go over a bump or ditch with only the one side then the noise comes from that side(obviously)...

if fate decides a rebuild, would it be cheaper to just get bilsteins?

and any suggestions where to get tein's rebuilt in sydney (or australia!)

thanks

dan

no its a tight bang, its a metallic sound, but not tinny, very solid. and can be pinpointed side from side if i go over a bump or ditch with only the one side then the noise comes from that side(obviously)...

if fate decides a rebuild, would it be cheaper to just get bilsteins?

and any suggestions where to get tein's rebuilt in sydney (or australia!)

thanks

dan

www.bilstein.com.au is the best place to get it done.

It's not cheaper to get a whole new suspension set up.

Bilsteins cost $250 per corner (x4 = $1000) and then its around $400 to put them in.

im guessing that means yeh theyre fooked? and im fooked because its not cheap to rebuild?

Well if you have no money to fix it up then yes, you're stuffed. :headspin:

You could go for a cheaper set of replacement shocks. I think Aussie made ones like Pedders will be cheaper.

Do you have any pics of your car?, MAYBE (i'm just guessing) that its the wheels you have MIGHT have the wrong offset and are sitting outside the guard so when you go over a bump, the wheels actually hit the wheel arch (makes a similar sound), i guess it doesn't hurt to look at every possibility (when i had the wrong offset wheels on my car, the wheel were actually sitting out of the guard a bit) so when i travel on VERY bumpy road it use to hit and make a very annoying sound.

yeh thats the thing, it came with these teins from the dealer...

its ok, its in the shop now,

its gonna get worked!

new rotors, pads, caliper rebuild, braided lines, fluid etc, all round.

new daikin HD clutch and all bits and pieces that go with it.

new bilsteins etc (not 100% sure what will need to be done here yet)

full check over and service.

all in all its gonna be an expensive exercise, but most definately worth it.

hopefully i'll just forward the bill onto the dealership...

(doubt that will work though)

dan

The dealer has a responsibility to sell you a car in working order. If the clutch failed as soon as you bought it, it is their problem to have it fixed and they are legally bound to do so as long as the car was not sold on the agreement of a rooted clutch. You should have gone to them first thing rather than paying yourself to have it fixed. I doubt forwarding the bill onto them will make them pay it.

My 2 cents....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...