Jump to content
SAU Community

Recommended Posts

When: 6pm - 10pm, Wednesday 17th August 2005

Where: Calder Park, Calder Freeway, Keilor

Cost: $80 per driver (includes one pit crew entry)

Spectators: $10

Schedule

5:00PM Gates open

5:50PM Compulsory driver briefing

6:00PM Track opens, drifting begins

8:00PM Scrutineering closes

9:30PM Top 4 driver Tandem Battles

10:00PM Track closes

How to enter: All entries will be taken at the gate. Entries will be capped at 70. Those who arrive early will have priority.

Car Requirements: Cars must be of a safe and roadworthy standard. They must have working headlights and break lights. Fire extinguisher and roll cage are not essential but recommended. Seat belts must be worn and of a safe standard, harness’s permitted. All lose items must be removed from the car. It is recommended that you remove your front bumper to avoid damaging it.

Driver Requirements: Drivers must be licensed. Drivers must wear long sleeve top and long pants made of natural fibers e.g. cotton. Helmets must also be worn and are available for hire at Calder Park for $20.

Passengers: Passengers are strictly not permitted.

Tyre Fitting: Tyre fitting and 2nd hand drift tyres are available thanks to Autosphere. Costs are $10.00 to fit a tyre and $5.00 to purchase a 2nd hand tyre.

Top 4 Mini Comp

At the end of every practice night the top 4 drifters are chosen to drift in a mini competition. This is an opportunity for the talented drivers to get some real tandem practice and offers the spectators door to door action. 1st, 2nd and 3rd place are given prizes thanks to Autobarn Sunbury and Driftline Racing.

More details - visit FULLOCK

Link to comment
https://www.sau.com.au/forums/topic/82837-drift-night-calder-wed-17-august/
Share on other sites

  • 2 weeks later...

i went, it was a wild night..

i had fun, being only my second time out, i finally had a crack at the advanced track, and just as i was getting into it, they stopped it! :(

btw, i was in the gold r32

it was a great night. very cold though. iIt was good to see alot of new drivers out on the track, and doing quite well,

It was also another record for the amount of entries for the twilight meet aswell. so congratulations go out to FLM.

There was also a great increase in crowd numbers aswell.

see you all there next time.



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...