Jump to content
SAU Community

Recommended Posts

Hi everyone,

After a debate with one of my friends we could not come to a conclusion on this matter.

Does the GTR have a sequential turbo set up?

by sequential i mean that it has a small turbo to spool up quickly, while the second, larger turbo kicks in after - to overcome the problem of lag and to give 'constant' boost..

I have always been under the impression that GTR's DID have a sequential turbo set up but after chattin to paulr33 (i think thats his name) he has seemed to convince me otheriwse..

Link to comment
https://www.sau.com.au/forums/topic/82855-gtrs-sequential-turbo-set-up/
Share on other sites

the GTR's use a true twin turbo arrangement meaning that it is NOT a sequential turbo system. So that is why the GTR's are more laggy down low in the revs as they have got each turbo working with only 1.3L and 3 cyclinders.

Toyota's 2jz-gte engine on the other hand has a sequential turbo setup, however, instead of having a smaller turbo matched with a larger turbo, i believe the stock turbos are the same size.

A true sequential turbo system was the B4 liberty - they had 2 different sized turbo's and there was alot of complaints because there was a point in the rev range where the first one would cut-out and the second one had to spool out - meaning you'd get a second of slight power loss..

GT-R's are twin turbo - both spool @ the same time with the same boost levels..

  • 1 year later...

The cost vs the results in doing such a setup simply put... isnt really worth it. It would require a fair bit of rooting around

Hence there arent a lot of cars around with this setup, as its costly.

Most people soon as they chase power, dispose of the sequential from the outset

A true sequential turbo system was the B4 liberty - they had 2 different sized turbo's and there was alot of complaints because there was a point in the rev range where the first one would cut-out and the second one had to spool out - meaning you'd get a second of slight power loss..

GT-R's are twin turbo - both spool @ the same time with the same boost levels..

been as passenger in a mate's old B4. didn't notice any power loss, infact as soon as the 2nd turbo kicked in at about 4-5grand it would just push you back into your seat. thats how i remembered it anyway ;)

been as passenger in a mate's old B4. didn't notice any power loss, infact as soon as the 2nd turbo kicked in at about 4-5grand it would just push you back into your seat. thats how i remembered it anyway ;)

It's a pretty common annoyance for B4 owners, I test drove one and found it to be quite noticeable, just over 4K IIRC.

VGT anyone?

It's a pretty common annoyance for B4 owners, I test drove one and found it to be quite noticeable, just over 4K IIRC.

VGT anyone?

I have found the same with the b4's, there is a hole at 4-4400 rpm.

It's a pretty common annoyance for B4 owners, I test drove one and found it to be quite noticeable, just over 4K IIRC.

I found this true also, a mate of mine has a legacy gt with the twin turbo sequential setup and between 4 and 5 grand it feels like its off boost. Seems kinda odd as they gave it a smaller turbo to be on boost earlier but then it lags in the middle of the rev range anyway... :)

Several companies have tried to get sequential turbos to work, and most of them have failed. Whether its a torque hole during the transition (i.e. B4) or the convoluted plumbing that has a reputation for failing (RX7), eventually people give up on it.

I don't know why you'd want to have sequential turbos that are the same size (a la the 2JZ-GTE) - if you want something to spool faster before you get the big power, why not get a smaller turbine matched to a bigger one? If they're the same size you may as well put them in parallel (like the RB26DETT) rather than in series, and just use smaller turbos.

Of course, the new BMW 335 has a sequential setup and by all accounts its a smooth engine. I wouldn't mind taking one for a drive and giving it a go, but it might be a sequential turbo setup worth buying.

Yeah as mentioned the 2jz uses sequential turboes of the same size, Toyota did this to gain low down power and anyone thats drivin a supra will also know around 4000RPM there is a drop in power when the 2nd turbo comes online.

Turbos have come a long way since the mid 90's tho hence the reason people put on big singles on the 2jz. A GT35R wont spool much slower than a stock sequential system on a 2j but will make alot more power.

There would be alot of R&D needed to make a sequential setup for a GTR, IMO money would be better spent on a 3L bottom end if you wanted quicker spool

Edited by eddieneedsboost

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
×
×
  • Create New...