Jump to content
SAU Community

Recommended Posts

:D i have a problem where my car drops a cylinder intermittently it brings up engine check light .i have checked error code which is 21,and found it to be no cosecutive ignition signal while engine is running i presume this would be coil pack as my transistors are built into each and every one of my coil packs unlike earlier skylines where the had a transistor module mounted at back of engine on top of the plastic cover, but it only has happened three times and it doesnt do it long enough for me to disconnect each coil to pin point the bad coil,my biggest problem is the cost of the coils i have being qouted aprox. $2-300 a coil due to the fact that the transistor is built int the coil also depends on which coil type i have as nissan list a few part no.s does anyone no which coil part no is mine.my skyline is r34 GT with a rb20de engine or if any one no of a cheaper option in new zealand as prices for these coils are all over show the other thing i am wondering is it possibly because i have reset the computer and it always does it secound drive after reseting the computer is this possibly a phenomenen that happen with computer relearn or just a coincedence.can anyone answer this.
Link to comment
https://www.sau.com.au/forums/topic/83358-intermittent-ignition-miss/
Share on other sites

  • 3 years later...

My engine light came and and I got a service they hooked up the Nissan computer but they couldn't find the problem. I rang Power Road car sales where i bought my R34 Gt from and they identified the problem by just me explaining it over the phone.

I just got a new coil pack installed by them today, costing 240, (130 for the coil pack form Nissan) They also claim to have a machine that tells them which coil pack is playing up.The car runs smooth now, but my engine light is still on. I was told that the computer needs resetting, but I would have thought that the light would switch its self off once the problem is solved.

Does any one know how to reset computer or do i need to take the car to a specialist?

My engine light came and and I got a service they hooked up the Nissan computer but they couldn't find the problem. I rang Power Road car sales where i bought my R34 Gt from and they identified the problem by just me explaining it over the phone.

I just got a new coil pack installed by them today, costing 240, (130 for the coil pack form Nissan) They also claim to have a machine that tells them which coil pack is playing up.The car runs smooth now, but my engine light is still on. I was told that the computer needs resetting, but I would have thought that the light would switch its self off once the problem is solved.

Does any one know how to reset computer or do i need to take the car to a specialist?

Disconnect the negative terminal from the battery, hold your foot on the brake for around 10-15 seconds, reconnect it, and voila.

Never replace with OEM Nissan coil-packs....they're the reason why you're in this situation. Get splitfires and never look back. Just replacing one coil means you'll get another do the same thing very soon, in the end all 6 *will* die and you've spent a billion dollars installing a replacement pack at a time.

Do it right the first time, splitfires! :dry:

My engine light came and and I got a service they hooked up the Nissan computer but they couldn't find the problem. I rang Power Road car sales where i bought my R34 Gt from and they identified the problem by just me explaining it over the phone.

I just got a new coil pack installed by them today, costing 240, (130 for the coil pack form Nissan) They also claim to have a machine that tells them which coil pack is playing up.The car runs smooth now, but my engine light is still on. I was told that the computer needs resetting, but I would have thought that the light would switch its self off once the problem is solved.

Does any one know how to reset computer or do i need to take the car to a specialist?

Slightly off topic - $130 per coil pack from a Nissan dealership that's not too shabby, my local Nissan dealership was asking me $196 each.... so I ended up getting a set of splitfires for $530 - to be honest I can't feel any difference (I have an r34 n/a btw) - splitfires are great value in comparison to the Nissan ones.

Splitfires in the end will save you alot of money, not every mod is going to give you a big difference. I felt good response after installing them :dry:.

But anyways. These kinda mods are more durability.

Atleast thats my opinion on this particular mod.

MRXTCZ

Speaking from experience, once packs start palying up the car runs like shit, you lose power and get missing high in the rev range under boost, and that's if you haven't already lost cylinders. It's all down hill after they go.

My advice to anyone that buys an R34 is "factor coil-packs in the price and do them straight away"

yeah you were all right. The next day the car went to shit.. They are all replaced now and the engine light is off and running smooth!

Thanx for your help..

I hope any one with this problem in the future doesnt make the same mistake.. replace them all !

  • 2 months later...
yeah you were all right. The next day the car went to shit.. They are all replaced now and the engine light is off and running smooth!

Thanx for your help..

I hope any one with this problem in the future doesnt make the same mistake.. replace them all !

Looks like I have the same problem. But I also get the TCS OFF and SLIP lights on aswell as the check engine light. Did you have those come on aswell??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...