Jump to content
SAU Community

Recommended Posts

This might be a stupid question but isnt VVT only on the r34 Neo engines, and not the r33 rb25det? So your adjuster mod can only be used on cars fitted with VVT?

Noise???? Based on the 2 degrees advance we apply to GTR's and RB20's, it doesn't make the idle "lumpy", if that's the question.  They just sit there and idle, same as they did before.

Emmissions, that's a bit tougher to answer as it depends on how the engine is tuned before the inlet camshaft timing is advanced.  Just fitting an exhaust and turning up t he boost to 10 psi makes an RB25DET fail the ADR standards.  I suspect if you advanced the inlet camshaft timing 2 degrees on a totally stock engine it would make bugger all difference to the emissions, with NOx being the only question.

:mellow:  cheers :blink:

Sydneykid, have you tried to advance on the inlet of r33 with as et of poncams?

Sydneykid, have you tried to advance on the inlet of r33 with as et of poncams?

Depends if it is an R33GTST or R33GTR. The 3 X RB25's we have used Poncams in work best at zero degrees. In my experience, GTR's always benefit from adjusting the camshaft timing, regardless of the brand of camshaft used.

:mellow: cheers :blink:

Depends if it is an R33GTST or R33GTR.  The 3 X RB25's we have used Poncams in work best at zero degrees.  In my experience, GTR's always benefit from adjusting the camshaft timing, regardless of the brand of camshaft used.

:P cheers :P

Sorry it's r33 gtst. you meant zero degree in both inlet and exh?

I reckon I might be able to find some of my lost power by dialing the cams in with this adjustable inlet pulley.

Maybe my inlet cam is one way or the other and I'll be able to find the best position for it.

0 Degrees will probably the best spot, but I'm not confident that mines at 0 now.

  • 3 weeks later...

Well, Paul33 is testing the adjusters this weekend with Dr Drift.

Thanks to both for giving it a go.

Unfortunatly I can't make it to have a look. I'm doing wedding stuff with my fiance. And if I want to continue to speak in a voice that doesn' sound like Michael Jackson, then I must accompany her.

Godd Luck guys, I look forward to the results.

BASS OUT

hey bass i forgot to tell you, mega sorry its not going in this weekend, its being booked in mid next week, prolly go in wednesday as sam has been flat chat. ill pm you monday what time its going in on wednesday

  • 3 weeks later...

Hi guys,

Sorry for the late reply and big delay. We had the cam gear fitment put on over the weekend and after testing we made no extra power whatsoever. My cams were dialed in at the factory position and made the best power there. Any more advanced and we lost power everywhere else but gained like 2rwkw in the top end.

There are some pics of the unit fitted below (can get better ones if you like). Very nice little invention/concept just a shame the power increase wasn't experienced. Let me know if I can help in any other way or test stuff etc. Dyno chart to come tomorrow when I scan it up, shows unit fitted and no change, then 3 deg advance then 5 deg advance

Pictures: http://members.dodo.com.au/paul/pics/camadjust/page_01.htm

Hi guys,

Sorry for the late reply and big delay. We had the cam gear fitment put on over the weekend and after testing we made no extra power whatsoever. My cams were dialed in at the factory position and made the best power there. Any more advanced and we lost power everywhere else but gained like 2rwkw in the top end.

There are some pics of the unit fitted below (can get better ones if you like). Very nice little invention/concept just a shame the power increase wasn't experienced. Let me know if I can help in any other way or test stuff etc. Dyno chart to come tomorrow when I scan it up, shows unit fitted and no change, then 3 deg advance then 5 deg advance

Pictures: http://members.dodo.com.au/paul/pics/camadjust/page_01.htm

We usually find 1 or 2 degrees advance on the inlet camshaft is the best on the non VVT engines. Maybe 3 degrees was past the optimum.

:) cheers :D

Pauls inlet was already set around 2/3 degrees advanced, which is why we didn't see the gains that Bass did.

Summary:

Moving the adjustment of the inlet cam gear from the back to the front is an excellent idea. If your cam timing is not right, you can expect some noticable gains. I would highly recommend this modification to be done when the timing belt is being changed, or the cams are being upgraded. It is a very simple procedure that provides extra flexability when tuning, and may help find some 'lost power' that some 33's are missing.

Sam.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. Was just wondering if you were having a small stroke or if there was some slur/gaf/inside joke that I wasn't aware of.
    • That was a fark up, it's Salamanca Place I was thinking of. And now I'm curious as to what potential slur/gaf I have caused with Salamander Road, ha ha!
    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
×
×
  • Create New...