Jump to content
SAU Community

Recommended Posts

Found a 94 R33 GST-t which I’m interested in, excellent condition, tein suspension, 60 000kms white, subtle body kit, after market diff, 3inch exhaust off the turbo, 17 inch and a couple of extras … the price is $24000

I have looked and driven others priced between $19000 and $22000 (the price range I was looking in) some with similar mods.

Any comments on the $24000? I feel it’s a bit high, but the car has great feel about and the quality is the best I have seen so far.

Link to comment
https://www.sau.com.au/forums/topic/8394-94-r33-gst-t-price-too-high/
Share on other sites

Guest GR33DyMANGO

where is the price quoted? is this an import? if so u could prolly import the same car for about $15g from japan if u act quickly. phone an import broker in brisbane.

ask the queensland section for the name of an import brokers name. the only downside of importing is the long long wait.

$24g in australia still does seem a little high.

that's right blackness.

FYI: the late 95-96 and the seriesII's were a tad better in the engine area. seperate coil packs on each plug, driver airbag, different spoiler etc....not saying they're faster or more superior, just sayin they command a tad higher price :)

I was going to go for a S2, but went for the "S1.5" instead :)

good luck with searching.... :)

If the engine has good compression and if the car is well serviced, not just engine but gearbox and diff, on a regular basis it is well worth the extra $$$.

Ever wonder why there are always theads about fuel ecconomy and people have these enormous differences on the same basic vehicle. Wonder why some less modified cars are faster, and on dyno days produce more power than more modified vehicles.

I looked at many a skyline in Perth before settling with mine. At the time there was a range of prices from 19k to 28k. Plenty of these cars were less than healthy, though to someone not familiar with what a good skyline should be like they all would seem like beasts.

Jap cars that have 'low Kms' are not victims of speedo tampering for the most part. It's not the kms you have to worry about it's the fact that these vehicles spend a great deal of time just idling and being driven 'start -stop' carbon glazing the bores nicely.

Originally posted by Strich9ine

that's right blackness.

FYI: the late 95-96 and the seriesII's were a tad better in the engine area. seperate coil packs on each plug

dont all lines from the 32, maybe even the 31 have seperate coil packs?

i know mine does.

Shaun

rev210

the car was running 0.8 bar but felt as strong as another 94 also running a 3 inch turbo back but running 1.0 Bar .....

Still hard call an extra $2000 to $5000 for the quality ie a FMIC and maybe a power fc

future plans for the car I end up buying will be the usual

FMIC

new ECU

upgraded fuel sys & different turbo

(unless I can find a well priced car that has all this done already)

Blackness,

'Feel' is not always a very good comparison. I'd be inclined to measure.

The extra $2000 to $5000 is what you end up paying to fix the 'cheaper car' down the track.

Buying the extra performance gear with spare change is tempting isn't it. But consider this: I have a car that has had very little done to it, no PFC no FMIC no ECU upgrade and conservative 10psi of boost. It is equal to or even faster than some with these improvements. All I can say is I expect to go faster still when and if I add these things down the track. So you can end up buying all these lovely expensive mods just to end up the same speed as the better condition stockie.

Forget what I said however if you just want the bragging rights to say my car has this that and the other mod dispite it not being able to crack a 13sec 1/4.

Blackness, Buying a imported car does have its benefits, e.g. Cheaper. But a local car you can have a feel to see whether you like it or not.... Also an imported car you can expect to wait for ages once it hits AU.... Have a look at the thread "Compliance Problems.. Help" or something like that

Cheers

Sumo

its a bit too pricy i think, wouldnt pay more than 18-19 grand.its a series 1 aswell i think usaid.

and u can get brand new tein coil cover suspension for $2200 or second hand for just over $1000. for a 94 model its too high.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...