Jump to content
SAU Community

Recommended Posts

^^

gangster rims looks sexy as pics when on pls :blink:

will do buddy next week ill have my tyres and ill post the pics in my build thread

there not shiny but, the flash made them come out that color, they r lambrghini satin black :D

specs takz? an get a low jack man it'll change your life

18x10 +13 (5mm spacer to clear brakes)

need to work the front guards abit

got some rims for the rear coming from Japan which is going to be fun to fit

impulse buy of the 18x10.5-9

also wanted to do something extreme with the car, i like a little mexican over flush

my front guards are also munched so i could look into 20mm wider front guards if i need a more flush fitment of the 18x10+13

Yer that's huge for the front!! You need flare and huge camber if you decide to lower your car!

As for the rear, that's just ridiculous!! I just ordered 18x10.5 +15 and may need a flare... Dunno what your planning on doing! Loll

i needed to flare for 9.5+25 and the fitment i wanted... lol

btw there is a dude on here that has even wider wheels stuck under stock metal :P

i'll find a pic... brb

specs look right epic dish, but i rkn itd be hanging out at least an inch if u got proper shot down the line, looks good but yeh possibly bit mexican me thinks plus to much guard work ceeeeeeebz

Just a quick question for you offset nuts lol

I'm looking to get a full set of xt7s for a 32 gtst. Would 17x8 front 17x9 +28 sit

Flush all round? or what offset should I be optin for? Stock 32 gtst calipers/brakes all round.

Cheers :)

alex - according to those specs, those wheels should sit or are sitting ~50mm further out than your wheels atm, doesnt look it... what you think?

yeh your right i just ran it on offset calc no chance its 50mm further out that would be feckin heapsssssssssssssssssss

it's 60mm more than mine... easily beleivable.... think about it...

30mm in the flare and another 30 past the guard... a titch more camber... easy

dont forget my guards are already an inch further out from pumping, and if i flared them that much...... hmmmmmmmmm

tempting... ffffffuuuuuuuuuuuuuu

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...