Jump to content
SAU Community

Recommended Posts

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Hi david

My name is stuart and i may be interested in your gtr depending on what you consider to be a fair offer.

I am not interested in any of the stereo gear as i have my own.

regards stuart :)

Edited by NISSANGTS
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

okay peeps other financial commitments have arisen. the car needs to go now asap.

PRICE DROP $24,000

also, brand spanking new 255/40/17's have just been fitted.

rest assured there's nothing that can be picked on in the rego transfer.

shoot me any questions if you have them.

many thanks

david

Edited by djhatton
  • 2 weeks later...

Unfortunately I am at least 4 months away before I'll be ready to purchase - but your car would be the kind of thing I'd be looking for, and the price seems very fair.

So consider this a free BUMP and best of luck

i'm not savvy with what the laws are like over there, but the car's pretty well thought out. i can't think of many things that it would be pulled up on. long way to travel tho :)

cheers!

d

BUMP

has it had a compression test or leakage test done i am interested but gunna cost a bit to gettit to tas

yes it has. i can't remember what the leakdown test results were specifically but they were fine. compression tests came up 140psi give or take a few across all cyls. either way they were consistent with the kms and condition the engine has (i.e. no cyl down like 20psi or anything).

shipping to tassie probably would be exxy yeah :) if you've got a couple of days up your sleeve, you could fly up and drive down. some good roads on the way there i understand :)

cheers

d

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...