Attessa Wires Gtr 32

[exXU1]

Would like to have the facility to have toggle switch on dash to able and disable the attessa.

I realize one can just pull fuse but which wires are the best to splice into and do properly.

Have done search and do not seem to be able to find any info .

your help is appreciated .

[Guest DIRTgarage]

Would like to have the facility to have toggle switch on dash to able and disable the attessa.

I realize one can just pull fuse but which wires are the best to splice into and do properly.

Have done search and do not seem to be able to find any info .

your help is appreciated .

<{POST_SNAPBACK}>

pull the blade fuse and use two male spade connectors to replace it.....make a small loom with an inline fuse and toggle switch to activate/deactivate ATTESSA...easy as!

[danh]

DIRT is that what you have done?

[exXU1]

pull the blade fuse and use two male spade connectors to replace it.....make a small loom with an inline fuse and toggle switch to activate/deactivate ATTESSA...easy as!

<{POST_SNAPBACK}>

Thanks for your in put buit a little un tidy , would rather pick up a wire of the ECU or under dash wiring .?If that is a all possible.

[Black R32]

i have been told that it is not a good idea at all to do it. is this true. i've been told that it puts a lot of undue stress on the rear end linkages, driveshafts and things of the like. i wanted to do this but was advised against it.

[Guest DIRTgarage]

Thanks for your in  put buit a little un tidy , would rather pick up a wire of the ECU or under dash wiring .?If that is a all possible.

<{POST_SNAPBACK}>

UNTIDY?? at least it does not comprimise the integrity of the original loom....cut/butcher if you like....at least my way can be reversed without a trace of tampering.