Jump to content
SAU Community

Recommended Posts

if the first option is apexi power intake try using that. i say just try them and see if it runs. have you entered in the injector compensation and lag time too? you should probably do that too.

yup tryed all option

injector compensation has ben done

but the sniffer says its running very lean and wont idle below 1500rpm

fine between 1500-3000 then super rich

chased a wiring problem to the throttle position sensor

so does anyone know for certain that you can run airflow meters with the d jetro power fc?

or is it purely map sensor

pete

does it still chirp second or what? that's the real test.

i reckon it may be time to call in an expert. i'm pretty sure you can run with AFM on DJETRO version PFC, but i can't say i've ever tried it...

I didn't think that the D-Jetro could run AFM's, is it just settings for different pressure sensor's?

I've almost finished translating a D-Jetro manual, so you could look at that.

if you have a translation could you please give us a bell

pete

0409226626

Edited by fatz

I have done 59/80 pages, unfortunatly you can only view the english on the computer (hover your mouse over the red line, and the translation comes up), the section you want is near the start, so i have translated that bit. Hope that helps

http://savman.dyndns.org/files/Power%20FC%20D-Jetro%20en.pdf (right click> save as)

edit: i have just completed all 80 pages.

Edited by sav man

From my understanding and talking to friends in nipponland, Djetro is happiest at WOT lol. Fatz. I got mine to start the car and shit but getting decent tuning is B/S. I gave up and went back to the normal PFC with Q45 AFM.

Also the djetro is happier with a single throttle body, there is a firm here in qld who make custom TB for a little sum of money.

So the unit is back in the box until someone works out finner tuning points, as I don't need the stress atm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...