Jump to content
SAU Community

Tuning Of R33

BookyVL

By BookyVL,
in Queensland

 Share

Recommended Posts

bazr33 Mentor

bazr33

Posted
Posted

im gettin my power fc installed at F.I.S.T at Wacol

they did a good job of tuning my car previously

cause my boost and timing was all outta whack .

I have been to apc with my intercooler avcr and dump pipe install

and had my intercooler piping resting against my radiater hose

and few nuts and bolts were missing .

so werent really impressed with them especially forking out 2500 for it!

got exotic exhaust to fix up the shit with the piping, did a great job.

So at the moment only going to fist, exotic exhaust to fit stuff

THanks

Link to comment
https://www.sau.com.au/forums/topic/86971-tuning-of-r33/#findComment-1571850
Share on other sites
Mr-Toy33 Grand Master

Mr-Toy33

Posted
Posted

Alot of people have highly recommended Hardcore down at Slacks Creek to me over the past week or 2 since I've been meeting a few other skyline drivers from here.

I'm taking mine down this weekend to have them check out my turbo for me as it looks like it's up for a rebuild.

Link to comment
https://www.sau.com.au/forums/topic/86971-tuning-of-r33/#findComment-1573189
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • thatjawncrazy
      Another "where do these lines and plugs go" RB25DET question

      By thatjawncrazy · Posted

      GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Stringycheese
      Blue slip

      By Stringycheese · Posted

      Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • PranK
      Blue slip

      By PranK · Posted

      Should have asked what is the car?
    • PranK
      Blue slip

      By PranK · Posted

      I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...