Jump to content
SAU Community

Recommended Posts

Hey Softy...

This could be a very stupid question :P But....is that a Workshop X front bar??

If not what is it?

Where can I get one!!!!! I likes :)

Ando

NZ they have a website...www.google.com :lol:

EDIT: http://www.workshopx.co.nz/

Edited by konect

Jaik - Yeah I agree, no good rear bars from em, but i like the skirts and front bars they do! Was just gonna look at getting the URAS rear bar as EVERYONE has front & skirt URAS kits

Konect - Cheers champ :P

Hey guys i have a lot of info on the wsx kits as i was oging to get one but as time rolled by i got over them...

the front bar is based on the nismo r33 400R skyline, the one that was first posted up was a prototype model created sometime between '00 and '03, when '03 hit they realised that the sport of drifting was simply destroying their first design as it was too flimsy so they updated to the newer style

workshopX have a rear bar in the making as of november last year, chances are it will be ready in time for the start of the 2006 D1NZ season, but don't quote me on this info...

you can buy the kit from

www.k-stylecarshop.com check them out they should be able to help you but last i checked their site was down, the kit itself is about $1500 (front bar = $1000 side skirts = $250 ea.) then you have freight n customs n tax n GST on top of that...

they are beautiful kits however, by the way, not sure if you guys are familiar with the nz drift scene but fanga dan has gotten rid of his RB26 Laurel and upgraded to a silviaS15 and transplanted the RB26!

n guess what else? WorkshopX has made a bodykit for him, hopefully it goes into production! (not a four door but it gives me a stiffy so shutup!)

post-13494-1138849025.jpg

post-13494-1138849065.jpg

Thats for the FYI Mr Eps!! :)

I like the look of both the front bars posted, the one DJ Dave :P posted is the one i thought was WSX thus why i queried the other pic as it looked very 400R'ish.

HHmmm althou $1500 for kit (not including rear bar) + P&H could be expensive when can get a local kit for sub $1K.... It's only gonna get cained anyways.....

Ando

DJ984 - Yeah would consider it but what rear bar would suit up to match the style of WSX kit?? URAS? Any ideas on how much it would cost for a kit to be sent from Kiwi Land?? Are we talking $200 or more? I have NFI :)

Then gotta consider fitting...painting...$$$$$ Goddamn it but bless imports...more expensive than women :D

DJ984 - Yeah would consider it but what rear bar would suit up to match the style of WSX kit?? URAS? Any ideas on how much it would cost for a kit to be sent from Kiwi Land?? Are we talking $200 or more? I have NFI ;)

Then gotta consider fitting...painting...$$$$$ Goddamn it but bless imports...more expensive than women :huh:

Mr Eps: I thought i'd seen that as the price somewhere... just didn't wanna say anything without facts lol!

Ando : I like the look of it with the standard rear eh... maybe you could have a custom rear lip or whole rear bar made to your taste instead of picking something else? go-on... dooowwwit!!! :)

hi flow 33 turbo

custom 600x300 fmic

5zigen full zaust

power fc & avc-r

sard fpreg & walbro fpump

sard bov

apexi pod

xtreme 2500 clutch kit

hd coilovers

P1 buddyclub 2's

etc etc...

275rwhp

post-17721-1139801635.jpg

post-17721-1139801708.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...