Jump to content
SAU Community

Recommended Posts

it will be my streeter for japan, so will do the daily duties when i stay over there, also used for skids on the street, and as a final backup if my missiles break.

will slowly mod it while it's over there, wondering if i should go the slammed stock kit on 15's look, or the big kit and 18's look. definitely no missiling this car, it will probably be my first import i actually take care of the looks with it haha

thinking something like this:

http://carher0.files.wordpress.com/2010/04...w=800&h=600

http://carher0.files.wordpress.com/2010/04...w=800&h=532

once it's done it's 2 years, ill bring it back as a personal import and street it here

it will be my streeter for japan, so will do the daily duties when i stay over there, also used for skids on the street, and as a final backup if my missiles break.

will slowly mod it while it's over there, wondering if i should go the slammed stock kit on 15's look, or the big kit and 18's look. definitely no missiling this car, it will probably be my first import i actually take care of the looks with it haha

thinking something like this:

http://carher0.files.wordpress.com/2010/04...w=800&h=600

http://carher0.files.wordpress.com/2010/04...w=800&h=532

once it's done it's 2 years, ill bring it back as a personal import and street it here

i vote tough offset and slammed

please dont ruin that laurel Stewy looks awesome, i rekn leave the kit as is and just get some better 15's........think of the cheap tyres

the main reason im thinking 15's is cos i wanna run like 185's for street, slows down the skids a little bit and makes it easier to train with people on the street

please dont ruin that laurel Stewy looks awesome, i rekn leave the kit as is and just get some better 15's........think of the cheap tyres

all tyres are cheap here. if you pay more than about 5000-6000yen new for anything for skids here your going to the wrong shop.

the last ss595's i got were about 5000yen each in 215/45/17

the main reason im thinking 15's is cos i wanna run like 185's for street, slows down the skids a little bit and makes it easier to train with people on the street

you mean you'll have no grip with the 15's so you'll have to slow down the skids because of grip issues ?

good to see your still going the 4 door route, looking the guds :D

it will be my streeter for japan, so will do the daily duties when i stay over there, also used for skids on the street, and as a final backup if my missiles break.

will slowly mod it while it's over there, wondering if i should go the slammed stock kit on 15's look, or the big kit and 18's look. definitely no missiling this car, it will probably be my first import i actually take care of the looks with it haha

thinking something like this:

http://carher0.files.wordpress.com/2010/04...w=800&h=600

http://carher0.files.wordpress.com/2010/04...w=800&h=532

nice , i vote stock bars , nice rims , ultra clean :/ oooorrr big kit big rims clear lights everywhere orr :D

look at this interior, f**k yeh!! haha, all it needs now is some VIP food trays and dildo gear knob.

72486_456466128743_733698743_5423642_1373816_n.jpg

nice , i bet you have roof lining too :) , don't forget drink holders :)

pics: better offset would make this car look tuff:

post-20231-1288610188_thumb.jpg

post-20231-1288610204_thumb.jpg

post-20231-1288610268_thumb.jpg

post-20231-1288610299_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...