Jump to content
SAU Community

Recommended Posts

Issue 36 of AUTOSALON magazine has a decent 4 page article on our SHOW N SHINE from a few months ago :P

A few quotes..

"The visiting public were treated to a feast of some amazing machinery"

"The goal of the day was to display various model skylines in all their glory"

An impressive article on the show and plenty of good photos :huh:

Front cover of the magazine has the red 'NSX GT' on it..

ok thanks 4 that abo-bob!!! havent got it yet just thought i missed out on the feed back cause i missed last issue. well there you go sau member's that entered!!!!!!!! some of you are shown in a number one magazine around the world.

well done to sau again!!!!!!

Ok,

Below a list of main pictured cars.

Min71E

R34

GTR201

Weapn

SLY25L

CYIFLY

JAS25T

NSM032

GTR032

2HP075

Two66L

HUG32R (Twice???)

AD91GM

CWH08U

VNOM

GTR026

MPH 459

RNMENC

I left a couple of ones out as I could not see the number plates

I left a couple of ones out as I could not see the number plates

Hehe, one of those would be mine...I was flicking through the mag at the newsagent today and noticed a small shot of the arse end my car in the middle of page 150 :mellow:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...