Jump to content
SAU Community

Recommended Posts

  • Replies 101
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Out of curiousity what was your terminal speed with the 13.2?

Originally posted by 400HP

I had two passes which were pretty ordinary. 13.2 ET with 2.1 60FT (I know I know....)........I don't think I'll have any more mods in the car by then so I hope to run a 12 in current trim.

As long as I line up VISHES I'll be happy BWHAHA =)

Originally posted by RONIN

ed: myself, carlo, and nick will be there to spectate. I believe Minh is coming out too. not sure if he's running though

ok...you guys know what I look like hahaha...

I'll be there with my tripod and camera...hope to get a few vids...

With a better launch, you could have possibly cracked the 12s.

I mean barely..I'm talking 12.9

You should be getting closer to 1.7-1.8 on the 0-60ft time. Work on your launches. ie. It's a GTR. You want to light up the rear wheels so the front wheels actually do some work. So, rev to rev-limiter if not close to it. Release clutch (quickly, hell sidestep if you want :(:) ).

Make sure to brace neck accordingly. The snap into 2nd could also do some damage (to your neck or car...what ever is weaker)

:D

Originally posted by 400HP

poyz - I think 107mph or something like that?

Hello Peepz...the impression i had from this drag meet was that SAU would hijack the scene from the rotaries and V8s....but that was not the case :) oh well next time we can turn up in numbers :)

As for my result, I ran a best time of 13.4 @ 103mph @ 1 Bar with 2.0sec 60ft time :)

u ran a 13.4 linus?

damn.....i wanna run mine but im afraid ill run a 16+sec+!!!

i guess ill have to suck it up and give it a go.. :)

Atlantis Aquariums :) heard u were there on sunday, thats my mates shop ;)

I was supporsed to turn up but i was too buggered from carts, ....she was not happi i didn't come :)

Originally posted by VISHES

Hello Peepz...the impression i had from this drag meet was that SAU would hijack the scene from the rotaries and V8s....but that was not the case :)  oh well next time we can turn up in numbers :)

As for my result,  I ran a best time of 13.4 @ 103mph @ 1 Bar with 2.0sec 60ft time :)

Silvias RULE :bahaha:

Originally posted by DON91E

u ran a 13.4 linus?

damn.....i wanna run mine but im afraid ill run a 16+sec+!!!

i guess ill have to suck it up and give it a go.. :)

Atlantis Aquariums ;) heard u were there on sunday, thats my mates shop ;)  

I was supporsed to turn up but i was too buggered from carts, ....she was not happi i didn't come :)

yeah i was happy with that run....all night i was doing low 14s..then last run i decided to launch a little harder :)

yep..i was there with my friend...she wanted some seahorses!!!

i thought it was intrusive since they were having a private grand opening party...




  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...