Jump to content
SAU Community

Recommended Posts

Hi, Rob

you should able to meet your goal, however you might have to consider get a aftermarket equ-ength (spelling?) of manifold made up..coz the gas will flow much better then stock..

Originally posted by rob77

I have a td06-20g with a 16cm2 exhaust housing. It should be tuned in the next 4-5 weeks, currently sitting on the stock manifold and with a stock ecu. Makes 344hp @ 13psi, full boost by 4600rpm. I expect boost to come on quicker once the ecu is fitted, if it isnt much better I'll look into a tubular manifold. I'll let you know how I go, but I expect to make 360ish with the ecu and around 14psi.

Good to read about these buildups, like Steve's 3037, bbenny's 2530 and Rob77's TD06. Really gives some good reading, and shares alot of (expensive) knowledge.

There should be a few more project writeups soon, with Roy's new hairdryer, Akira's quest for a decent tune with rice, GTR STI's animal, my brother's and my own street car....and the list goes on.

I agree this section, forced induction performance, seems to be the best read and most information packed. The state sections tend to be filled with whore crap. Its good to see so many r33's been taken beyond the stock turbo, the more people who do it and then post their findings the more information we have and the easier it becomes for others to decide which way to go. Went for a blat this evening to get some petrol and milk and shit to keep the preggers wife happy and shit my car scares me sometimes... so much power and so little traction :D Although gtst-vspec has less traction than me, we went fishtailing down the road yesterday on the way to picking my car up from the panel beater after some truck driver wacked my car outside work. I am hanging out for my ecu now, then I can scare myself some more ;)

I had drive it tonight..

took off at 1st gear rev till 7000 hear the wastgate open shift to second heard it again shift...and it's keep throw me back to my seat , lag is there, but down shift will make it easy to drive..the boost so savage.....so hard...i would not take any elder in back seat, who might need a neck reconstruction after have a lift..

When the it's on boost and pass a big left turn, I need to keep the throttle steady..coz I can feel the car start to sideway....need to slow a bit, I have FM901 235 all around, and now I am thinking about some semi slick now..

what a great night..

i know of a car running a t67-25g (similar to tdo6-25g) on a rb24. hes not running a/m ecu yet and doesnt really have that much lag but it hits pretty hard. he spins his 255 semi slicks in the dry on boost in the first 3 gears,while only running 15psi. pretty scary considering hes getting a powerfc and boost up to 22-23psi.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...