Jump to content
SAU Community

Recommended Posts

Item: R32 GTR Clear Indicators

Location: Melbourne Australia

Item Condition: New

Reason for Selling: Don't complement the look I'm going for

Price and Payment Conditions: $350 plus postage. Full payment up front to my Bank Acct, can organise paypal if you cover the fees.

Extra Info:

These are brand spanking new indicators, they've never been fitted to a moving car. I fitted them to mine for all of about 1/2 an hour before deciding that they made my R32 look like an R33. It may tickle the fancy of some, but it didn't do it for me. I hung onto em for the good part of a year before deciding that I was never gonna fit em, so I'm selling em now.

They were brought down from Japan (so technically they are "JDM tyte" :P). I don't know if the bulbs light up (the orange ones came with the indicator), because I've never bothered to hook em up. Ideally you'd wanna fit chromed/clear bulbs that light up bright orange, because standard yellow bulbs will look gay in this type of indicator. The pair also have some silver paint spattered on the plastic housing (on the outside, where no one will see them because they're hidden by the inner guard and fender). They also have a silver ring of around the lens that looks to have been sprayed on. I don't know why they're there, and I didn't want to try and take it off for fear of damaging the lens.

You can buy em yourselves from D-Speed:

http://www.dspeed.co.jp/winker/index.html

94_3.gif

for 38,000 yen, that's almost $500 plus postage and all the other fees you'll probably have to pay to some backyard "parts import specialist" bring it down for you.

Here's a bigger pic of the pair (yes, they are on top of my laundry basket :P):

indicators_clear.jpg

They are no different to a standard R32 GTR indicator other than the clear lens and no inner bubble. The have standard GTR mounts, which means they won't fit anything other than a GTR.

Contact Details:Shan Moorthy, [email protected].

Further condition for this thread:No bitching, no "you can get em cheaper <insert location>", if you don't like the price being asked for, keep it to yourself.

I will start taking offers at $350, and let this run for a week, obviously the highest offer will get the set. Keep in mind they're only worth $500 so I wouldn't expect to get an offer that's more than that. I may choose to retract the sale at any time if somehow I'm convinced that an R33 is a good looking car. :D

These will NOT fit a GTSt, GTS, GTS4, GXi, or GTE, nor will they fit anything other than a R32, although it'll probably fit a civic or integra, seeing as you can fit everything from R34 tail lights to mercedes headlights on them.

The lens on this indicator is a single moulded piece, unlike the narrow body variant which is composed of two pieces glued together.

You can pick em up from me if you're in melbourne, or I will ship to anywhere in the world, as long as you cover the cost of postage from Melbourne Australia. I'll mark em as a gift, sample products of no commercial value, your grandma's christmas present, or whatever you want if you don't wanna pay taxes. They'll arrive in a box, bubble wrapped and paper padded.

Link to comment
https://www.sau.com.au/forums/topic/88235-r32-gtr-clear-indicators/
Share on other sites

AFAIK the vertex fenders for an R32 GTSt are only wider above the wheel arch, and not at the indicator, which means they won't allow for a physically wider GTR indicator, which this set is. You will need GTR guards and GTR bumper supports to mount this indicator onto a GTSt.

Funkey - as an aside, do they look like standard Nissan items modified with a clear lens?

i reckon they are and they've used a silver paint around the edges to hide the rejoining marks... what do you think>?

Its a single clear piece (obviously made from a mould taken of an orange lens), the joins are in the black area just like an original lens, so there's really no reason for the silver paint. Looking at it, its sprayed over clear glass.

Beats me why its there, as I found it pretty pointless. If anything the edgeing makes it line up better with the headlights, as the headlights have a black edging caused by the inner plastic.

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...