Jump to content
SAU Community

Recommended Posts

I have no affliation with these guys. just thought it would let people who might be interested in on it. Should be good day.

FLYER:

Dear Valued Customer,

Our Dyno room is finally completed. We now have one of the best rooms in the Country. It is sound insulated and has massive air flow (6 changes to the whole room per minute). Our Dyno software has also been upgraded to the latest Winpep 7 which is Windows based with air/fuel ratio attachment and logging. All temperatures and pressures are automatically calibrated every second, so the accuracy is unquestionable.

To celebrate this, we would like to invite you to our Dyno day, which will be held at BD4's on October 8th 2005.

DynoJet

Dyno Day / Power Run

$60.00 Power run (Normally $150.00) PLUS a Sausage Sizzle.

Also on the day All HKS Parts in stock will be on special at 15% off

Recommended Retail Price.

Please note: We have a 2-wheel dyno. Some 4WD's can be dynoed eg. R32 GTR, R33 GTR($40.00 extra to disengage front diff).

Sorry No WRX's.

There will be prizes for the most powerful NA & most powerful turbo vehicles on the day.

Please reply back to me if you are interested in coming along. Limited numbers.

dynoday.doc

Link to comment
https://www.sau.com.au/forums/topic/88380-hksbd4s-dyno-day/
Share on other sites

I'm happy for BD4's that they got a new dyno/room but what a waste of their time. Building an entire new room to house a 2wd dyno when their target market really is heavily populated by 4WD cars seems a bit stupid.

I'm just whinging because i still dont know where a decent local 4WD dyno is :(

Link to comment
https://www.sau.com.au/forums/topic/88380-hksbd4s-dyno-day/#findComment-1609787
Share on other sites

I'm happy for BD4's that they got a new dyno/room but what a waste of their time. Building an entire new room to house a 2wd dyno when their target market really is heavily populated by 4WD cars seems a bit stupid.

I'm just whinging because i still dont know where a decent local 4WD dyno is :P

Theres a place at with a 4WD Dyno Tuggerah/Goford which always runs dyno days.

TM Motorsports

3/99 gavenlock road(cnr boswell close)

tuggerah 2259

ph-43530733

Link to comment
https://www.sau.com.au/forums/topic/88380-hksbd4s-dyno-day/#findComment-1610538
Share on other sites

I beleive its $60 for power run inc bbq and catering.

for 4wd cars its $60+40 (inc taking out front drive shaft) which is pretty time consuming and will hold people up. BD4s is a very nice workshop. Agreed 4wd dyno would be nice, but so is the price tag that comes with it! over $70k for RWD and over $160k for 4wd. do the maths?

Link to comment
https://www.sau.com.au/forums/topic/88380-hksbd4s-dyno-day/#findComment-1611603
Share on other sites

yes i agree. expencive equipment.

its abit pricey but they are all around 50 bucks anyway. with a barbi its ok.

buy the way i have you got all that shit sorted out with herman yet? i also need to give you some cash for my manifild etc. :lol:

Link to comment
https://www.sau.com.au/forums/topic/88380-hksbd4s-dyno-day/#findComment-1615862
Share on other sites



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...