Jump to content
SAU Community

Recommended Posts

Hi ,

Just wondering if anyone out there is interested in purchasing some GT-R prints?

The images come from Dino Dalle Carbonare in Japan. You would have no doubt seen his work in HPI and DriftBattle mags.

They are approx:30 x 20 inch (760 x 500mm) and are printed on photographic paper (not some dodgy inkjet, quality LED printing), they come unmounted, delivered in a postal tube.

Also limited range of JGTC prints.

These will be the start of a new range of automotive prints from my business.

The cost will be $80 (incl. GST) + $5 postage and handling. I need to have some idea on numbers before I proceed with a print run.

PLEASE NOTE: Price change to $55 + incl. GST plus postage of $5. I need minimum of 20 orders of print for this price. This is a SAU price only.

Thanks

post-2524-1127432615.jpg

post-2524-1127432663.jpg

post-2524-1127432910.jpg

Edited by gtrtech
Link to comment
https://www.sau.com.au/forums/topic/88666-gt-r-prints/
Share on other sites

Yes, I knew the price would be the first thing everyone would jump on but without having any figures for quantities it's hard to set a break even point.

Sadly the images themselves are not given to me, they must be paid for and images of this quality are not cheap. Likewise the printing process is not cheap, but it is the best quality I could find. I'm looking to supply 1st class prints, not cheap crap. There is sadly enough rubbish around already.

I believe that if you look around the pricing isn't as bad as you think, these are not posters, they are large photographic prints. The print is good for 100 years if displayed under the correct conditions (i.e no direct sun, etc).

Selling them unmounted, although you won't probably believe this, is a way of trying to cut cost's. Framed or block mounted would add too much to not only the price of the actual print but blows the cost of delivery out to the extreme. Packaging, insurance and finding someone who can actually deliver them without damage is harder than you think.

Also choosing frames or even mounting styles creates problems, not everyone likes the same thing.

By the way, this isn't some huge company trying to flog you stuff. Just one bloke working from home in between work and family committments.

Keep the feedback coming.

Cheers

post-2524-1127441573.jpg

post-2524-1127442347.jpg

Link to comment
https://www.sau.com.au/forums/topic/88666-gt-r-prints/#findComment-1601361
Share on other sites

80 is actualy what ya expect btw.. lol. duno if any of you guys have been here. but go to http://www.deviantart.com and go to the shop area where ya can buy prints of what ppl have made, and for that size, a gloss print starts around $75 AUD .. btw if ya go there the prices will prob be in USD unless ya change it

Link to comment
https://www.sau.com.au/forums/topic/88666-gt-r-prints/#findComment-1601369
Share on other sites

Just a quick clarification, the JGTC images are not from Dino but from another photographer in Japan.

Oh, and of course the images you see here are low res.

Cheers

Edited by gtrtech
Link to comment
https://www.sau.com.au/forums/topic/88666-gt-r-prints/#findComment-1604739
Share on other sites

Don't have any R-33 stuff at the moment, I'll see what Dino has available. Also will try and source some R-32 shots. I know that he has shot Garage Saurus R-32. Must admit it seems like everyone is only doing R-34's now in Japan.

Link to comment
https://www.sau.com.au/forums/topic/88666-gt-r-prints/#findComment-1605306
Share on other sites

I'm happy to say that the price will drop if I can secure 20 orders of an individual print. I've done a deal with the lab who output the prints and there giving me a discount on a 20 print minimum order.

The new price will be $55 (incl. GST) + $5 Postage & Handling.

Please don't forget that these images are not available anywhere else.

I have contacted Dino in Japan and he's going to sort some images of R-32/33's for me so hopefully I'll have some new images available soon.

Also looking at framing and mounting options again, so stay tuned.

I'm still looking for feedback on what everyone would be interested in.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/88666-gt-r-prints/#findComment-1612713
Share on other sites

thats good pricing if pics of the 32s and 33's are nice i would consider getting a 32, 33 and a 34 photo. i will keep an eye on this thread.

ps if you are getting a 33 make it the midnight purple one :)

I'll see what I can do for you, but please remember I need 19 other people to want the same image to get the lower pricing.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/88666-gt-r-prints/#findComment-1613910
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
Btw can u get any jap workshop or JGTC RX7's ?

Here is everthing i have at the moment. This on top whats already posted.

Which price were you looking at? I can be a bit flexible price wise on images I already have but anything new is going to be more than $55 for 1 off prints.

I can source images from just about everything in Japan (and Europe for that matter) but to do 1 off prints from images I buy they would up end costing over $200.

(purchase image from photographer + layout/computer + printing = big$)

Not trying to scare people off or go the big whinge but I need to sell at least 10-15 of each print to break even.

Cheers

post-2524-1130988892.jpg

post-2524-1130988933.jpg

post-2524-1130989036.jpg

post-2524-1130989074.jpg

Edited by gtrtech
Link to comment
https://www.sau.com.au/forums/topic/88666-gt-r-prints/#findComment-1686882
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...