Jump to content
SAU Community

Suspension/handling Specialists....


Recommended Posts

Hi..i'm wondering if anyone can recommend workshops and mechanics who know their stuff on fitting and setting suspension and handling setups, i.e coilovers, camber,castor, toe fitting and settings, for skylines?

Anywhere within about 30kms of brisbane.

Any info will be greatly appreciated~

Thanx~~

Link to comment
https://www.sau.com.au/forums/topic/88958-suspensionhandling-specialists/
Share on other sites

i won't be using mercury again for any of my work, but each to their own. However, if you do use them, get someone independant to check after they're finished

I use Shaun at Goodyear Strathpine... great guy and pretty switched on, does top work etc.. he races an Evo in some form of rally so he know a bit about what he's talking about :D They're also a Fulcrum Queensland dealer.

Thanx people fer all the info...fulcrum? do they do tests on used coilovers? im basically getting a set of used coilovers and wanna run a test on their usability, and also if there is any leakage and other problems before buying and installing them at the same time. Will these tests be expensive if they are available?

Murcury are not suspension specalists, they get all their alligment / set up work done down the road at fulcurm, they are quite happy to fit suspension parts though. In my opinion it would be better just to go to fulcurm in the first place.

Accurate suspension. Timms court :)

They seem to do good work, just I think you need to say I want this. Not ask them what you need.

Other than that try and track down Scotty, I think hes over redlands way now.

Murcury are not suspension specalists, they get all their alligment / set up work done down the road at fulcurm, they are quite happy to fit suspension parts though. In my opinion it would be better just to go to fulcurm in the first place.

Actually they go to quickfit on enoggera road (the one next to the mobil).

Or how about www.shockreco.com.au. They can rebuild anything. I had my standard struts rebuilt 2 weeks ago and couldn't be happier with their work.

-rb25

Not since Scotty left, I wouldnt go back there.

Not knocking their work, but hold on to that reciept, and check those shocks on the 29th day after the work was compleated. Rebuilt coilovers apparently only have a 30day warrenty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Food for thought, the stock oil filter thread is a 3/4-16 UNF, which has an ID of about 10 to 12mm (according to ChatGPT lol). Now compare than to an 10AN, which has an ID of about 14mm (Raceworks is 14.2mm, Speed flow is 14.27mm).  
    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
×
×
  • Create New...