Jump to content
SAU Community

Recommended Posts

in nsw cops get around this limitation of powers by breath testing you every time they stop you. especially when they know they are going to go over your car or pop your bonnet for defects.

once they do the breath test they are clear to open/search what and where they like and you cant say shiat

Umm they do that in Queensland too...

Oh and on a side note I was breath tested the other week, was a RANDOM one setup just outside the valley, turning left to go to Bowen Hills (where that roundabout USED to be).

Anyway, about to let me through when the officer heard the exhaust...was about to go over the car until the Sgt said, forget it, looking at him its all legal (and yes it is, my mechanic does most of the QT inspections for Redcliffe and surrounding areas cause he knows the rules better than them...

So look like a nerd and you should be right (note I am glad I was still in work attire), but yes they do have the right to go over the car anytime.

Note, if you are PARKED in a car park then they CANNOT search your car without a reason. I had an incident a couple of years back at the Hypermarket at Aspley,long story, but in the end, the police asked me to pop my bonnet, I refused, they called QT, QT turned up 2 hours later (this is for a 2000 SSS with an exhuast wheels and lowered mind you), while two cops checked my REAR tyres and commented I must have been doing skids.

QT turned up (after a large Big Mac meal, thanks Wayne) and told the officer he was being rediculous, took one look at the car and told me to go home. Oh and also commented to the GENIUS ones looking at the rear tyres that it was infact FWD...the look on their faces was priceless.

The cops FOLLOWED me home, I sent a nice letter with the officers details and a complete detailed explanation of the events, including times, names,comments to the Boondall office, and he got nice desk duty for 3 months as my story matched the taped conversation...just so happens I also have friends there too, thats how I found out he got 3 months pushing a pen!!!

Edited by Bobjones
  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hmmm, interesting reads guys since I'm (eventually - slowly) moving back to Brisbane. I'll point out now that my intent when I return is to do some work as a vehicle engineering modifications inspector or what they call VASS (vehicle assesment signatory scheme) in Vic so it is important to know the differences for both business and my own car ownership needs.

Just a couple of quick notes from what I have just read.

BOV must be fitted after the turbo to be effective. Also all engines must have a crankcase breather and it must be fitted before the turbo to be effective. Conclusion, crankcase gasses can be emmited from an atmo BOV but plod doesn't need to know that. The best fibs have an element of the truth. :)

Cutting holes in the body should be fine as long as they don't affect a structural member or sufficient strengthening has been added to maintain normal integrity.

For pulling a driver over they need a reason as stated earlier. Mandatory breathaliser does not fall into this category unless they witnessed driving consistent with being under the influence. If they ABUSE this IOT do an inspection then they are leaving themselves open to complaint and desk duty (good one Bob). I also have friends in Police services around the country from SA right around the eastern states to NT. They are good guys who have their reps ruined by a few tosspots so be nice initially and if they are said floggers then immediately ask for the recording and recommence the conversation.

Cheers and good luck with the inspection darren.

and how do we look like a nerd bob?? hehe

I wear a suit and tie to work, on this occassion I still had the tie on from a late meeting (trust me I hate the friggin things), plus I wear glasses to work,cause all this time looking at other peoples money and reading legislation, anc computers has made me blind!!!

Plus, I am a Forensic Accountant...and all accountants are nerds... :lol:

Accountants, with lawyers, are the natural enemy of the Engineer.....but they need a life too.

I wear a suit to work even though I'm a "uniformed" member of the ADF and the suit is much nicer :)

by 'followed home' do you mean by cops or some unknown person?

kinda scary if your getting followed home by someone you dont know...

as a precaution for all:

try to loose them, and whatever you do, don't go straight home. or your just telling the theiving bastards where to find the milk in the supermarket

I do a lot of counter tailing as well. I live in a quiet street with no through traffic so if followed it would be by a neighbour or someone with a reason to be there. So will often drag a following car around a few extra blocks and get them lost in the back rabbit warrens of the estate then bugger off through the poorly known back entrance.

Security gets stupid with a Skyline sometimes.

Technically I am like a lawyer accountant...and my brother is an construction engineer...

Funny thing is we have a similar personality...except he is a wanker and drives a V8

Well they either cancel out or you are doubly damned :(

And while I like my V8 soarer I have 3 skylines to atone for my sins.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey y'all! I'm curious about how y'all go about widebodying your cars. I noticed that when running a square setup, my front wheels are a bit more tucked in than my rear wheels. Not by much, maybe 5-10mm. This leads me to wonder - when I widebody, should I use narrower front flares and wider rear flares? I found a set of 40mm rear flares that I really like, and was thinking of pairing them with some 18mm front flares, but I don't want the car to look strange. How have others done this? Note, I'm in a sedan. Thanks!
    • And if it was anything other than an auto tranny part, it might be a problem. But seeing as all auto trannies belong in the recycling bin, it's fine.
    • I have an R32 Fenix rad. It is good.
    • All the schemas I can see, indicate your typical setup of ATF 'cooler' (read: heat exchanger) in the bottom radiator tank..ie; https://nissan.epc-data.com/stagea/wgnc34/5413-rb25det/engine/214/ ...but I can prattle on a bit here. These trannies have a thermistor in the sump ~ the TCU reads this and 1. bumps the line pressure up when the ATF is 'cold' and 2. prevents the TC lockup clutch from operating, until the ATF comes up to minimum operating temp (keeps the ATF 'churning' through the TC so it heats up quicker) -- trigger point is around 55C. In these conditions, the engine coolant temperature rises faster than the ATF temperature, and also helps heat the ATF up, which is why it's best to think of the in radiator tank setup as a heat exchanger ; the heat can flow in both directions... ...with these trannies, the 'hot' ATF comes out the front banjo bolt, flows through the cooler/heat exchanger, and returns to the box  via the rear banjo bolt. This gets a mention, due to the wildly different opinions wrt running auto trans fluid coolers ~ do you bypass the in radiator tank altogether, or put the cooler inline with the in radiator tank system...and then, do you put the additional cooler before of after the in radiator tank system?... ....fact is the nominal engine operating temp (roughly 75C), happens to be the ideal temperature for the ATF used in these trannies as well (no surprises there), so for the in radiator tank system to actually 'cool' the ATF, the ATF temp has to be hotter than that...lets say 100C -- you've got 25C of 'excess' heat, (slowly) pumping into the 75C coolant. This part of the equation changes drastically, when you've got 100C ATF flowing through an air cooled radiator ; you can move a lot more excess heat, faster ~ it is possible to cool the ATF 'too much' as it were...(climate matters a lot)... ...in an 'ideal' setup, what you're really trying to control here, is flash heating of the ATF, primarily produced by the TC interface. In a perfect world, wrt auto trans oil cooling, you want a dedicated trans cooler with builtin thermostatic valving - they exist. These should be run inline and before the in radiator tank system ~ when 'cold' the valving bypasses the fin stack, allowing the ATF to flow direct to the in radiator tank heat exchanger, so it works 'as intended' with helping heat the ATF up. When 'hot' (iirc it was 50C threshold), the valving shuts forcing the ATF through the cooler fin stack, and onto the in radiator tank heat exchanger...and you sort of think of it as a 'thermal conditioner' of sorts...ie; if you did cool your ATF down to 65C, the coolant will add a little heat, otherwise it works as intended... ...the 'hot' ATF coming from the front bango bolt, is instantiated from the TC when in use, so all/any flash heated oil, flows to the fluid-to-air cooler first, and because of the greater heat differential, you can get rid of this heat fast. Just how big (BTU/h) this cooler needs to be to effectively dissipate this TC flash heat, is the charm...too many variables to discuss here, but I just wanted to point out the nitty-gritty of automatic trans fluid coolers ~ they're a different beastie to what most ppl think of when considering an 'oil cooler'... /3.5cents   
    • Been a busy but productive day. Axle and hubs acquired. All fitted up after a bit of modifying. Need to sort out wider mudguards and running light reflector covers but other than that the trailer is gooood to go !!
×
×
  • Create New...