Jump to content
SAU Community

Recommended Posts

Item:HKS 2510

Location:Sydney

Item Condition:Great Condition!

Reason for Selling:I dont need it as i have installed a 2530 already.

Price and Payment Conditions:Will swap for powerfc or wold 3d v4 with hand control or $800. No COD pls.

Extra Info:Can be inspected if needed be.

Contact Details:0412367890 or pm me

Any Offers will be considered.

PART NAME: HKS 2510

COMPRESSOR:

-Wheel- 63 Trim - 47.7 Inducer / 60.1 Major

-Housing- 60 Inlet / 50 Outlet - 0.60 A/R

TURBINE:

-Wheel- 62 Trim - 53.0 Major / 41.7 Exducer

-Housing- GT25 inlet / Internal GT25 oulet - 0.64 A/R

Part # 1404-RA151 * 63 Trim .64ar. T3 Flange With internal wastegate.

- 300hp Output

Pics

dscf35444mh.th.jpg

dsc002915lu.th.jpg

dsc002925tc.th.jpg

dsc002936kq.th.jpg

dsc002956ie.th.jpg

dsc002968hf.th.jpg

Edited by gwaping2k
Link to comment
https://www.sau.com.au/forums/topic/89386-for-sale-hks-2510/
Share on other sites

sorry no lines, came with some hoses though.

Also ur stock oil & water lines can be used, i had my stock oil & water lines modified to be fitted on my hks 2530. I am sure this is the same. This is meant for my car, but change my mind, i went a step bigger.

make an offer ppl.

I want a power fc or wolf 3d v4. :cheers:

Direct bolt on fit for RB20/25?

What is a 2510 rated at?

Have you instaled this unit previously on your car, or know the installation history and km travelled?

Interested just chasing a bit more info.

cheers

Yep, its a T3 flange, this directly bolts up to ur standard manifold & has 6 bolts style to plugs straight to ur dump pipe :P

Also ur the dude who bought my M-spec front bar :D ello!

New price 700 pretty much firm. Acutator removed, however stock wastegate acutator can be used. It now includes the oil lines & water lines. One line is braided already.

New pics on top

Edited by gwaping2k

yeh sorry unfortunately i needed that. 650 pick up.

the dude who bought my stock turbo had a look at this one

& he reckones it in very good condition, he wanted it but he had no cash for it, so he bought my stock for his rb20.come have a look to see for urselves.

my number 0412367890.call me for queries

Edited by gwaping2k

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...