Jump to content
SAU Community

Recommended Posts

We have been doing heaps of tests on oils recently, as we have set up a test using a head in a jig tied into a lathe. The head is then spun at 6000rpm with a syrenge set up on a timer to periodically drop 20ml of oil on the the cam lobes with the test performed for 20mins on each oil. The cam and all related valvetrain is then swapped for another set of new gear so we can gauge exactly what each oil is doing. The tests we are doing are a little crude as compared to full laboritory testing but funnily enough castrol has been sending us samples of new oils they are releasing, initially i think to see if we knew what we were doing but now as a secondary source of info.

The problem is each year oil companys are under stricter and stricter regualations on emissions which means they are removing good minerals and chemicals that prelong engine life and stop engine wear.

It has been very interesting to see what some of the oils have done under the testing. Synthetics are generally half as good as even the cheapest mineral oil, but alot of cars must run synthetic for the weight properties. I dont want to bad mouth any oils and I wont but from our tests, if you want a good synthetic oil for your car run a motor bike oil like motul or repsoil. The oil for motorbikes doesnt need to meet emissions testing and it it designed better as in a bike it has to be under more loads as the gearbox uses the same oil. About the closest to these in terms of performance in our testing would be redline synthetic, and motul 300. There are few good other ones but these few I have mentioned are easily available to most of you guys.

Hope this helps

Castrol was quite good with there mineral 20-50w oil being one of the very best commercial oils and its a good price. There synthetics were better than alot of the others but still not what you would want for the price you pay, alot better than the other major three if you can read between the lines.

For a more standard engine ie, standard lift, duration, valve spring rates its is sufficient!! PM If you want some direct comparisons!!

Cheers.

Gearbox redline light weight shock proof

diff redline mt90

gtr tranfers DONT USE REDLINE you most use the matic d nissan oil if you want it to last (this came from a head more knowledgable than myself who had rebuilt a shit load of transfers)

engine mobile 1 is good so is the redline products

I use redline light wieght shock proof in the transfer too... its great no complaints so far :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...