Jump to content
SAU Community

Recommended Posts

I had the same problem.

Switched to Redline Superlight weight shock proof!!

It's now a dream to drive, whether its a cold start or up to temp. it's faultless.

It's expensive at about $135gal. (you would use just under a US gallon for a Skyline Gearbox)

I strongly recommend it if you want results :)

Link to comment
https://www.sau.com.au/forums/topic/90100-redline-or-motul/#findComment-1625454
Share on other sites

My car is crunching gears,  :O  (recently serviced). I doubt it's the synchro's as the car has only done 85,000 and I don't drive it like crazy.

Which gearbox oil is better, redline or motul with graphite in it?  :D

If you can get some Kendall synthetic gear oil you will be very suprised how much better your gear change is. Also I slipped some Slick 50 in as well.

Link to comment
https://www.sau.com.au/forums/topic/90100-redline-or-motul/#findComment-1629238
Share on other sites

Firstly, I believe there are 3 oils in the Shockproof Gear Oil range. Superlightweight, Lightweight and Heavyweight.

From what I understand, if your car use is "normal" and your box is in good condition, you should use the Superlight Weight.

For older g/box's and/or for more abusive use ( track use etc. ) go the Lightweight.

Then the Heavyweight is for dog box's etc and extreme power / usage.

But even after saying that, I'll be using the Lightweight Shockproof in my fully overhauled g/box only because I've used it before and know how well it works.

Hope that helps some :(

Link to comment
https://www.sau.com.au/forums/topic/90100-redline-or-motul/#findComment-1638070
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...