Jump to content
SAU Community

Recommended Posts

I'm in ACT, looking at R33's, preferably series 2 (I want ABS and preferably at least one air bag).

If you go to to drive.com.au and put in nissan/skyline/sydney and look at the results, there are many cars on offer from a dealer called Japlink.com.au (you have to pess the "show dealer info" on the bottom right to see them. They are typically 96 onwards, near original condition, between 50-90 thou kms on the clock and range in price from 18-24K.

Now my question is: I've heard of odometers being wound back. Been talking to a friend and he reckons the more recent imports (eg 96 on) are more likely to have been wound back than ones from 95 and earlier.

Considering that the NEWEST R33 Skyline I can find from a dealer in Canberra is a 96, done 123 thou kms (not sure about the options), and is going for 23K... what does that mean? I'm probably gonna go look at the latter this weekend, but there's no way in hell I'd pay that much.. unless it's FULL optioned, i'm talking the LOT, and in great condition.. but I doubt it, because a lot of them in Canberra are not only more expensive than Sydney, but less features, more kms and older cars.

It's not even: "this 96 R33 in Sydney with X features and Y kms costs 19K in Sydney and 25K in Canberra",

its more like: "this 96 R33 in Sydney with X features and Y kms costs 19K in Sydney and a 94 R33 in Canberra with X-4 number of features and Y+40 thou kms costs 25K."

What GIVES? Are all the Sydney ones wound back? I'd find it hard to believe they all are? They all look like good condition from the photos I can see online. Or are Canberra dealers all charging way too much?

And just in case these Japlink cars are for real, has anyone had experience with them? I know ppl don't like paying out shops etc on here, so if you've had good experience, say so, and if bad, just say "I've dealt with them ..." or something equally as obvious, so I get the point. No details needed! Surely that's acceptable to everyone's morals/standpoint. I'd like to know as I'm gonna make the trip to go look and don't want to waste time at places that are renowned as dodgy.

Hope to sort out my confusion... thanks in advance.

I mean hell, I live 10 minutes drive from work (Belconnen to Civic for those who know Canberra) and I do buggerall on the weekends and I travelled 15 thou kms last year. Some of these cars at dealers in Sydney supposedly did 55000 / 9 = 6111kms a year... I know Japan is a small place but.... as if. Pls tell me if I'm wrong.

Dude, 95% of all imported skylines are wound back in Japan.

Ignore the km's completely.  Look for wear on the steering wheel, drivers seat, handbrake, floor mat etc.

As he said. Ignore kms, no matter what year it is, they are all wound back

Yeah just ignore them. But sometimes its hard to tell. My car has 140,000Km on it right now (96 R33 Sereis 2). I do believe that this does seem genuine, but who knows. Also my steering wheel has practically no wear on it, maybe just a little scratch.

Edited by krzysiu

Yep all wound back. The one you saw in Canberra has probably been in Australia for a while so it has some genuine klm on it as well :D

I got mine with 44,000klm and sold it 4 years later with about 110,000klm. And had exactly the same problem, people quite reightly expect to be able to trust the klm and did not want to pay for what seemed to be high klm compared to the rest of the market

as ive recently learnt, most of the 1's with low kms (ie 33,000kms on a series 2 R33) with log books, is probably genuine, but probably because it was sitting in the shop after an accident waiting to be repaired for ages!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...