Jump to content
SAU Community

Recommended Posts

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

put the new discs on today, look awesome and work sweet!!!! finally no more squeeks!!!!

thanks again Paul!!!

oh and i recommend the bendix advance pads, not too soft and not as hard as the ultimates... only $82 from repco

put the new discs on today, look awesome and work sweet!!!! finally no more squeeks!!!!

thanks again Paul!!!

oh and i recommend the bendix advance pads, not too soft and not as hard as the ultimates... only $82 from repco

Good stuff :)

Hey, recieved my fronts today by courier!! you're right they're so heavy :(

Haven't fit them yet but look the goods and i'm really happy with the service, price and goods.

Thanks Paul, will look forward to doing business again in the future.

One set of fonts left over from the group buy.

R32 GTST (RB20DET)

Front (280mmx30mm) - $195.00each ($390set)

Shipping - FREE (Aus wide).

:)

One set of fonts left over from the group buy.

R32 GTST (RB20DET)

Front (280mmx30mm) - $195.00each ($390set)

Shipping - FREE (Aus wide).

:O

These also fit S14, Stagea (RS4) & 300ZX.

:)

If this one comes around again, I'll put my hand up now for R33 Front/Slotted

$422 delivered is too good to pass up!

PM sent.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...