Jump to content
SAU Community

Recommended Posts

Guys,

Ive posted before asking if my setup will make 350AWKW, know id like to know the following:

Will the facotry ignition system keep up?

What spark plugs and what gaps?

Will the R33 GTR pump keep up?

What gearbox Oil?

What Front Diff Oil?

What Rear Diff Oil?

To refresh your memmory my setup is

RB26 Head Mildl Ported and Fully Rebuilt

HKS Step 1 272 Cams

HKS Cam Gears

Nismo 600cc Injectors

Apexi Power FC

Nissan Q45 AFM

R33 GTR Fuel Pump

Nismo Adj. Fuel Reg

GCG XTR T60 Turbo

GCG XTR 55mm Wastegate

Custom Manifold (Equal Length)

100mm Thick Cooler

14-Row Oil Cooler

RB30 Bottom End

O-Ringed Block

Head Restrictor Etc

H-Beam Conrods

CP Forged Pistons

ACL Race Series Bearings (Heat Treated Ones)

Straigh Through Exhaust System

Twin Plate Clutch

All this is going into my R32 GTR with a standard R33 GTR box. I dont think ive missed anything let me know if i have

Cheers

Edited by GTR_Junkie
Link to comment
https://www.sau.com.au/forums/topic/91191-some-questions-about-my-new-setup/
Share on other sites

sounds good.

redline oil heavy(red one) in gearbox and diffs.

coils shouldnt be a problem but you may need to gap the plugs down

id use a iq22 denso.(7 range in ngk,0.4mm iridum.)

fuel pump wont cut it.

injectors will be at there max.

youl need a much biger oil cooler

stock pumps are at there limit around 370-390rwhp.

just put in a bosch 044(rated at about 600-700hp) i think.

go easy on the stock box as 3rd gear is weak as shit, not fun to change believe me.

Injectors at there  max ???? and a bigger oil cooler??? Maybe i should have stated it will be street driven not track raced or anything

Thats not what u said in ur other threads on the same subject.

A 350rwkw GTR is a waste of time and fuel driving as a daily driver on the road these days.

330rwkw 600cc injectors at 90% in my old motor.

oil temp with properly ducted 25row oil cooler still gets up to 115deg from brooklen to berowa. about 5mins flat out.(sock 32gtr)

id run a external 044 with a surge tank etc(unless you always have a 1/4 tank)

if you are going to do it you may as well do it properly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
×
×
  • Create New...