Jump to content
SAU Community

Recommended Posts

hey all, engine of scrutiny is a rb20det swapped into a s14 chassis.

as of late its developed a slight miss at idle and under full boost round 7.6krpm it will cut out for a second and then contiune on.

revlimiter is set at 8.5, but when it hits at 7.6 its pretty rough and doesnt like it much at all......however fuel is not a problem as its about 11.8:1 round there.

ive gapped the plugs down to .6mm now and still no change, perhaps the coils have finaly gone south?

carl

Link to comment
https://www.sau.com.au/forums/topic/91291-odd-revcut/
Share on other sites

yah i figured its proly a coil going bad but if thats the case then im just gonna convert to wasted spark.

new coils off ebizzle for 1$usd and some sparkplug leads and some creative wring and all coil woes will be relived forever.

You are dreaming if you think that's the case. Plenty of guys have thought that, most are now back to the original coil on plug set up. The rest sold the car.

A faulty coil/coils do not display all of the symptoms you are describing. Cleaned the injectors lately? Cleaned the AFM lately? Changed the plugs lately? Checked the AAC valve?

:O cheers :)

Link to comment
https://www.sau.com.au/forums/topic/91291-odd-revcut/#findComment-1645514
Share on other sites

You are dreaming if you think that's the case.  Plenty of guys have thought that, most are now back to the original coil on plug set up.  The rest sold the car.

A faulty coil/coils do not display all of the symptoms you are describing.  Cleaned the injectors lately?  Cleaned the AFM lately?  Changed the plugs lately? Checked the AAC valve?

:( cheers :(

I'm one of them.

I tried running 6 bosch coils and leads after the astounding results of a mate with a CA and then an SR. He could run 1.4 plug gaps and a/f ratios deep into the 10's with no miss (and this was still utilising the stock ignitor).

I could make about 5psi on my rb25 before blowing out the spark if i eased onto the throttle, if i planted the throttle it would just break down and miss instantly. It was wired exactly the same as on my friends SR, i even went and got 2 CA ignitors thinking the internals were bigger as the pins were bigger and ran 3 channels on each, no difference.

Went back to rooted stock coils and it was 200% better, got splitfires and it didn't miss anymore.

Link to comment
https://www.sau.com.au/forums/topic/91291-odd-revcut/#findComment-1647021
Share on other sites

hehe, well i was hoping that it would atleast aleviate some problems......

so far in an effort to fix the problem ive removed the maf and given it a good cleaning with contact cleaner (i run blowthru), pulled the plugs out only to find that they are still clean and plenty of life left (gapped down from .8mm to .6mm) and i havent cleaned the injectors as of late........

the aac valve i swapped out a few months ago because i thought the one on my car was faulty, turned out to be an improperly set tps.......

i did clean and lubercate the aac while it was out of the car and it does work fine, idles up when its supposed to.

im gonna guess that i should run some injector cleaner thru my car and see if that helps?

its wholey possible ive gotten some fouled gas as gas shortages (read: gouging) may have caused some stations to put in some dodgy gas in place of premium........

Link to comment
https://www.sau.com.au/forums/topic/91291-odd-revcut/#findComment-1648074
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...