Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Yep see Anthony at Autowholesale he'll sort you out for your CPV35 needs... Ive driven the red one - VERY NICE... but its auto :D Good thing with these different to the R34 situation is they are going for pretty much the same at auction whether auto or manual.

If you wanna import yourself - then a basic povo spec CPV35 (coupe), 2003 with higher kms (around 30 - 40,000kms) will set you back around 2 million yen if you can wait for the right price... which landed and complied and in your driveway is around $39,000 !! Not bad considering how much 350Zs still go for and you get the extra 2 kiddy seats :( The "Premium pack" which has BOSE stereo system and usually convertable Sat Nav / DVD and half-leather trim will cost you another few hundred thousand yen (still high kms), right through to a 2005 with 5,000kms or so where you're looking around $52,000 landed or more. But yeah that should at least give you a guide to a reasonable yard price... first lot will probably be stickered at $48k + ... but depending on kms and specification a few thou either side of that would be reasonable Id reckon... but hey - thats just my thinking based on auction prices and "landed quotes" from brokers. In my opinion the extra several thousand yard price for a warranty, after sales support, and BEFORE sales fixing of any surprises is well worth the difference.

Last time I asked, Autowholesale also said they'd be happy to find the right car for serious buyers with a deposit down - so ask where that is at the moment (not really brokering - still pay yard price with warranty and after-sales support etc - but at least get colour and specification level you're happy with).

And just so you know just about everything underbody is interchangeable with 350Z stuff - so you can grab an HKS 350Z exhaust or some coilovers etc and pretty much bolt it right on :D

Interestingly the blue one at Downunder in Leederville is gone - in fact the whole YARD IS GONE! Anyone know if they moved or closed shop??

For anyone thinking 4 door - the model you want to look for is the top of the line V35 350GT-8... 8 speed tiptronic (yes EIGHT speed - world first) VERY TIGHT RATIOS and rapid low end shift changes and PADDLE shift not button shift - same box in the new GTR i read - sposed to be very quick off the mark with the 8 speed and still with the 3.5 litre - pity bout the extra weight of the 4 door though. But these are about 75% the cost of the CPV35 at auction on average - so a nice alternate option with someone with only $34,000 or so to spend.

:)

Edited by Brazen

down under auto has moved to malaga or wangala..not so sure, but if yo go to the website, they have address on it.

the red 35 was driven half years ago on alb hwy, i saw it all the time with dealer number plate on, he should be enjoy that thing very well...

there is one from PMS with 8 speed auto calle GT-8 and it cost under 30k to land with compaliance and ready to rego... a blue one was for sale at 25,990...

they are not that expensive, unless the V35 skyline 2 door. and it looks better than 350Z and perform better...

Do the sums on the V35, search the forums about some of the stock offered in Japan and make sure they can comply the car first as some emission tests are yet to be sourced.

Just because it is offered for sale or you are told the car can be imported it dosent mean you will get it on the road 2 weeks after arriving at the workshop.

Even better let them use it as a test car..............

  • 3 weeks later...
I was going by the name in america. Which ofcourse is G35. I am never wrong so you must get use to it.  :)

If you go by the name in America, then you'd be referring to a lefthand drive example... not the case 'ere then, innit? :P I know you don't probably approve of it, but it's probably best to call it a... oh my gawd... a 'Skyline'...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
×
×
  • Create New...