Jump to content
SAU Community

Recommended Posts

Hi Guys

this car would suit collector and is one of the best you will find

Price $27,500

Kilometres 56,000

Body 2 door Coupe

Colour gunmetal grey

Interior Colour black/grey

Transmission 5 speed Manual

Engine RB26DETT

This car has tien electronic suspention, hks boost controller, stainless steel exaughst system with twin dump pipes, hks turbo's. These tasteful mods compliment this godzilla. Car's body condition is in very good condition and the interior is immaculate. definatley one of the best on the market and would suit a collector/enthusiat. Please call either 0422023478 or 0407564971

or you can email us [email protected]

1989bnr32%20001c.jpg

1989bnr32%20002c.jpg

1989bnr32%20007c.jpg

1989bnr32%20008c.jpg

1989bnr32%20009c.jpg

that is 27500 compliance and more then likley registered if you would like to talk more about the car and the small details please call tonight after 6.

thanks greg

that is 27500 compliance and more then likley registered if you would like to talk more about the car and the small details please call tonight after 6.

thanks greg

thanks for that.

just one more qu, was the car brought in under teh 15yo import rule?

if so, would u be prepared to sell it as is?

//gorjan

yes we would be prepared to sell as is, as the car was bought in under the 15 yo rule

thanks greg

also nice to talk to you gorjan

sounds good.

like wise.

are you able to talk if i give u a call?

//gorjan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So I actually had the cover off my car today, here is a (bad) pic of the setup. I have an oil cooler thermostat block, the temp sender is straight in there. The pressure sender has a short AN line to a T piece which is mounted (hopefully cable tied counts as mounted....) on the chassis. BTW every fitting you could ever imagine exists....just depends what they cost and how many you need. Raceworx AN adapters are here: https://raceworks.com.au/fittings/adapters/, I think you said you need BSPT to AN (https://raceworks.com.au/fittings/adapters/bsp/tapered/an-to-bspt-adapters/) and AN to NPT (https://raceworks.com.au/fittings/adapters/npt/) BTW, braided line is super simple to make. It looks intimidating, is not.
    • Perfect day for a pie, really needs a soft top in this weather though
    • Prime parking, she is a little girl...LOL
    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
×
×
  • Create New...