Jump to content
SAU Community

Recommended Posts

NISSAN ECU INTERFACE CABLE, USB version with NISSAN DATASCAN 1-4 and DATALOG VIEWER Software. :rolleyes:

P1010003BLAZTFORAD-T.jpg

For those who aren't familiar with these, the cable allows you to connect your laptop to your cars ECU(computer)via the diagnostic/OBD1 port.(pictured here) littleOBD1-T.jpg

Simply plug in, no installing required.

Once the NISSAN DataScan 1-4 software is installed onto your laptop you are able to view/monitor most of your engine sensors real time, read fault codes and clear them, perform active tests such as power balance, make temporary adjustments to ignition timing, injector cycles,fuel pump and more, great diagnostic/ monitoring tool.

dviewerfirstscreensmall-T.jpgdviewergrpahscreensmall-T.jpg

You are also able to record logfiles of your car and with the new Datalog Viewer software, quickly transform this information to an easy to read colour coded graph.

laptopenginebayforumadd-T.jpg

The cable length, approx 1.8m, allows it to be used from the passenger seat or in the engine bay.

These cables are commercial quality and are used in some of our major workshops, they are not the home hobbiest version but a highly developed, micro enginered product. They DO NOT have the interface box along the cable.

Prices: Dedicated USB Cable alone : $120

Nissan DataScan +USB Cable: $155

Complete package of USB ECU Interface Cable, Nissan DataScan and Datalog Viewer software : $180

There is a RS232(serial) version of the cable also available, it is $20 less than the USB version.

P+H $10

Payment by bank transfer is preferred.

I am located Nth of Wollongong but will post worldwide.

Kind Regards,

Caz.....

I got your Pm Scooby and if anyone else would like to see the system in action I will be at Oran Park Saturday and Sunday and WSID this Sat night. Drop me a PM and Ill give you a contact number.

Kind Regards,

Caz... :(

quote=Scooby,27 Oct 2005, 05:35 PM]

pm sent

I have had lots of PM's requesting details of DataScan software so here is a list of what you can read/monitor/record with this product,

The Nissan Datascan 1.4 software details:

Currently available functions:

ECU Part Number

Data Display

Resizable window

Analogue and digital gauges

Peak value display

Parameters depending on ECU:

RPM

Air Flow

Air Flow Right Hand

Water Temperature (C or F)

Oxygen Sensor

Oxygen Sensor Right Hand

Speed (KPH or MPH)

Battery Voltage

Throttle Position Sensor

Fuel Temperature (C or F)

Intake Air Temperature (C or F)

Exhaust Gas Temperature

Injector Time

Ignition Timing

AAC Valve

Air Fuel Base

Air Fuel Base Right Hand

Air Fuel Base Self Learn

Air Fuel Base Self Learn Right Hand

Injector Time Right Hand

Duty Cycle

Duty Cycle RH

Registers:

Closed TPS

Power Steering

Air Conditioning Switch

Start Signal

Neutral

Air Conditioning Relay

Fuel Pump

Thermo Fan

VCT

Waste Gate Solenoid

Air/Fuel ration (lean/rich)

EGR Solenoid

3. Data Logging

Parameters and registers as per Data Display

4. Active Test

Engine Temperature

Timing

AAC Valve

Air/Fuel Base

VCT

Fuel Pump

Cylinder Off

Base Idle Adjustment

clear Self Learn

5. Self Diagnostics

Read Fault Codes

Reset Fault Codes

6. Speed Trial

Measured times (kph or mph):

0-60

0-100

0-120

40-120

7. Rom Data

Slow Data Download (1 byte at the time)

Fast Data Download (8 bytes at the time)

8. Address Watch

Any address in CPU memory.

As you can see it is quite extensive!!

Caz... :P

  • 4 weeks later...

I will be at ORAN PARK Raceway tomorrow morning for the trackday, so if anyone would like to see this system in action or just use it to run a check on their car, please drop me an email to sort times.

Kind Regards,

Caz.. :)

[email protected]

**I will also have the PDA diagnostic tuner 'EcuXtend' demo unit with me :)

Hi Dave, I intend to sell them for quite a while! They system will work on nearly all performance Nissans between 89 and 97; so yes it will definitely work with an R33 just as nicely as an R32. The software was actually written for an R33.

It plugs into your diagnostic port, which is usually near the drivers right foot.

Caz... ;)

Hi Paulie_Bro,

Both the softwares are registered and have 12mths support and UPGRADES emailed direct to the email address you supply me with.

Cheers,

Caz.. :D

are the sotware upgrade free once you've bought??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...