Jump to content
SAU Community

Nissan Laurel - Rb25det

j_insoll

By j_insoll,
in Four Door Family & Wagoneers

 Share

Recommended Posts

j_insoll Collaborator

j_insoll

Posted
Posted (edited)

Heres my Lozza

Some new Pics at bottom of Page

C33 Nissan Laurel

Inspection Front Bar

Wonder Side Skirts & Rear Bar

Flared and Rolled Guards

Deep Dish Wheels (16" Front - 17" Rear)

Xenon HID Head Lights - Very Bright Artic Blue

RB25det Engine Conversion

5 Speed Manual RB25det Gearbox

Trust TD06 Turbocharger

GTR Frount Mount Intercooler

HKS Air POD

Oil Catch Can

Aftermarket Dump Pipe

Full 3" Mandrel Bent Exhaust w/ Cannon

GTR Fuel Pump

Greddy Type R BOV

Remapped ECU

Turbo Timer

Pivot Air Flow Converter

Triple Layer Radiator

Twin Thermo Fans

Twin Plate Clutch

Nismo 2 Way LSD

Short Shifter

Kei Office Coilovers (Everything Adjustable)

Rear Adjustable Camber Links

Cusco Front and Rear Strut Bars

Cusco Front and Rear Swaybars

5 Stud Conversion All Round

GTR Brakes

Slotted Rotors

8 Point Roll Cage

Boost, Water Temp, Oil Temp & Oil Pressure Gauges

Nardi Personal Steering Wheel

R32 Seats

Raised Bonnet

Zip Ties in Front Bar

Power

Made 300rwhp @ 1.1 Bar

Pictures

power_47.jpg

44_743.jpg

Edited by j_insoll
Link to comment
https://www.sau.com.au/forums/topic/92608-nissan-laurel-rb25det/
Share on other sites
j_insoll Collaborator

j_insoll

Posted
  • Author
Posted

konect - Yes the car is RWC and Registered, driven probably 2 or 3 Times a week.

jimbeam - I did not fit the TD06, a Japanese Guy did..........

Sky80 - Lier - I fitted an Oil Catch Can, Bride Seat, and put zip ties in the front bar. :lol:

But yes all the work was done in Japan

funkymonkey Grand Master

funkymonkey

Posted
Posted

very nice... it must be much more relaxing to drift in a Laurel than a cramped up Silvia :D

I've got a TD06 waiting to go onto a RB25DET, so I'm very keen on finding out what engine mods and management you've got to support the beast.

j_insoll Collaborator

j_insoll

Posted
  • Author
Posted
very nice... it must be much more relaxing to drift in a Laurel than a cramped up Silvia :rolleyes:

I've got a TD06 waiting to go onto a RB25DET, so I'm very keen on finding out what engine mods and management you've got to support the beast.

To the Monkey that just so happens to be Funky........... :huh:

Mods are as per posted in the List at the top. Apparently the car has a 'Chipped' ECU, although we have taken a look and dont think it has been touched, though we could be wrong. The Injectors are also Standard RB25det Item. You most likely have the Trust TD06-20g. Mine I 'believe' is the Trust TD06-17c. As far as I know the 20g uses The Single Blade type wheel and the 17c uses the Double Blade type wheel (The 20g is the newer version obviously). I hope im making sense. Im currently running 1 Bar (14.7psi) and It makes full boost at around 4500rpm. Obviously this is a bit Laggy, although I have a feeling the Actuator/Wastegate may be a little bit loose, causing a bit of unwanted Lag. I have had this problem in the past.

With a RB25det, Upgraded Fuel Pump, 550cc Injectors, POD, Frount Mount, Exhaust and a Power FC, you should be able to put out approx. 340rwhp @ 1.3 bar. That would be my guess from what ive experienced with my car. Id guess it to spool up around 4000rpm. But hey I could be wrong!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 GTR Speedo Drive , sensor type ?

      By GTSBoy · Posted

      It's almost certainly a reluctor generating an "AC" waveform. No, ECUs don't generally read those - they're usually set up for PWM square wave 0-5v stuff.
    • Butters
      R34 GTR Speedo Drive , sensor type ?

      By Butters · Posted

      Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
×
×
  • Create New...