Jump to content
SAU Community

Recommended Posts

Heres my Lozza

Some new Pics at bottom of Page

C33 Nissan Laurel

Inspection Front Bar

Wonder Side Skirts & Rear Bar

Flared and Rolled Guards

Deep Dish Wheels (16" Front - 17" Rear)

Xenon HID Head Lights - Very Bright Artic Blue

RB25det Engine Conversion

5 Speed Manual RB25det Gearbox

Trust TD06 Turbocharger

GTR Frount Mount Intercooler

HKS Air POD

Oil Catch Can

Aftermarket Dump Pipe

Full 3" Mandrel Bent Exhaust w/ Cannon

GTR Fuel Pump

Greddy Type R BOV

Remapped ECU

Turbo Timer

Pivot Air Flow Converter

Triple Layer Radiator

Twin Thermo Fans

Twin Plate Clutch

Nismo 2 Way LSD

Short Shifter

Kei Office Coilovers (Everything Adjustable)

Rear Adjustable Camber Links

Cusco Front and Rear Strut Bars

Cusco Front and Rear Swaybars

5 Stud Conversion All Round

GTR Brakes

Slotted Rotors

8 Point Roll Cage

Boost, Water Temp, Oil Temp & Oil Pressure Gauges

Nardi Personal Steering Wheel

R32 Seats

Raised Bonnet

Zip Ties in Front Bar

Power

Made 300rwhp @ 1.1 Bar

Pictures

power_47.jpg

44_743.jpg

Edited by j_insoll
Link to comment
https://www.sau.com.au/forums/topic/92608-nissan-laurel-rb25det/
Share on other sites

konect - Yes the car is RWC and Registered, driven probably 2 or 3 Times a week.

jimbeam - I did not fit the TD06, a Japanese Guy did..........

Sky80 - Lier - I fitted an Oil Catch Can, Bride Seat, and put zip ties in the front bar. :lol:

But yes all the work was done in Japan

very nice... it must be much more relaxing to drift in a Laurel than a cramped up Silvia :D

I've got a TD06 waiting to go onto a RB25DET, so I'm very keen on finding out what engine mods and management you've got to support the beast.

very nice... it must be much more relaxing to drift in a Laurel than a cramped up Silvia :rolleyes:

I've got a TD06 waiting to go onto a RB25DET, so I'm very keen on finding out what engine mods and management you've got to support the beast.

To the Monkey that just so happens to be Funky........... :huh:

Mods are as per posted in the List at the top. Apparently the car has a 'Chipped' ECU, although we have taken a look and dont think it has been touched, though we could be wrong. The Injectors are also Standard RB25det Item. You most likely have the Trust TD06-20g. Mine I 'believe' is the Trust TD06-17c. As far as I know the 20g uses The Single Blade type wheel and the 17c uses the Double Blade type wheel (The 20g is the newer version obviously). I hope im making sense. Im currently running 1 Bar (14.7psi) and It makes full boost at around 4500rpm. Obviously this is a bit Laggy, although I have a feeling the Actuator/Wastegate may be a little bit loose, causing a bit of unwanted Lag. I have had this problem in the past.

With a RB25det, Upgraded Fuel Pump, 550cc Injectors, POD, Frount Mount, Exhaust and a Power FC, you should be able to put out approx. 340rwhp @ 1.3 bar. That would be my guess from what ive experienced with my car. Id guess it to spool up around 4000rpm. But hey I could be wrong!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...