Jump to content
SAU Community

Recommended Posts

On the way into the city at around 7:45am, heading north.

Sign up saying Mill Point Rd exit was closed, reason: dark blue HSV commonwh0re had skidded across 3 lanes across some verge and (I think) into a pole head on, rear windows were smashed.

Then just on the other side of the narrows where all the lanes split up to go to Hay St & Mounts Bay Rd etc, two more cars off the road, one in the stripey white lines between two diverging lanes and another pointing the wrong way nose first down an embankment.

Not a cop in sight, just a couple of tow trucks.

A few Narrows escapes mes thinks :bahaha:

Link to comment
https://www.sau.com.au/forums/topic/9262-freeway-carnage-sunday-am/
Share on other sites

that millpoint exit is pretty dangerouse...

already claimed two life while back in porche 928...:)

I must say I take that corner way too fast... :P

but oneday if there is any oil spill then all the cars would skidd off the road end up head on pole or the brickwall.

so boyz and gals WATCH OUT Mill Point road EXIT!!

cheeers

Joe

yeah saw the blue vt on the left heading north 7:50am this mornin.. looked like a stolen car gone wrong, big fishy marks before its gone up kerb into pole. there was just a car there with orange lights flashing.

Wasnt that the Soccer player?

Yeh that commo really screwed it eh, skid marks across 2-3 lanes and WHAM!!!

On my drive home last nite i got followed for 3ks by cops right behund me and then ass i got off the freeway someone ran a red like a complete tool as i was goin through then i had various other stoopid drivers all in the space of 30mins!!! evil nite to be on the road.

Originally posted by Jon R33

Then just on the other side of the narrows where all the lanes split up to go to Hay St & Mounts Bay Rd etc, two more cars off the road, one in the stripey white lines between two diverging lanes and another pointing the wrong way nose first down an embankment.

The one down the embankment has been there for days, im stuffed if i can tell how it got there either. no marks, looks like they tried to do a runner form the cops and got stuck, judging by the sticker in the windscreen..

Originally posted by Pva_Glue

that millpoint exit is pretty dangerouse...

already claimed two life while back in porche 928...:)

cheeers

Joe

Most corners would be pretty dangerous if doing speeds in excess of 200k's. I'm pretty sure thats the speed the porsch was doing.

Originally posted by XRW

The one down the embankment has been there for days, im stuffed if i can tell how it got there either. no marks, looks like they tried to do a runner form the cops and got stuck, judging by the sticker in the windscreen..

Sticker has only been there since around 3pm saturday i think, i drove past that car about 12 times this weekend.

So is the fence in south perth all destroyed? thats what happened last year, ppl makin their own onramps.

aye saw that busted up commodore there on sunday morning as well.. wasnt there saturday night.. Was tempted to go back get some pics and see what parts i could salvage ;)

Hope the passengers/driver were ok..

That VL's been there for a while.. 1st time i saw it spun me out. Another tempter to get the car trailer load it up and run off :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...