Jump to content
SAU Community

Recommended Posts

Just thought id ask what ppl have done about the engine temps rising when yourve put on a front mount cooler, as mines running alot hotter i need to do something about it, i was thinking first ill flush out the radiator,new coolant and colder thermostat to see if thatll work, also does any1 have a part no for the rb20det thermostat

Link to comment
https://www.sau.com.au/forums/topic/9278-engine-temps/
Share on other sites

Same prob here, my car now overheats after about 4 laps on the track, something that even on hot days never use to happen. I was going to cut a larger opening in the OE bar, then make some aluminium or fibreglass shrouding to direct ariflow thru the IC and radiator.

If this doesnt help i suppose i will try the thermostat ($$$ and where do i get one from) as well an ARE aluminium radiator just to be sure.

Link to comment
https://www.sau.com.au/forums/topic/9278-engine-temps/#findComment-139108
Share on other sites

i fitted a thermostat from a VL to my 32 and run twin thermofans. With the stock radiator and a very big (600x300x73) fomt mount the temp stays at 80deg, in the last couple of days when it was 40+deg the temp would go up to 90 deg. This is with a new radiator and good cooling parts, so a alloy 32mm radiator is probably the way to go, but for $650+ try the other stuff first.

Link to comment
https://www.sau.com.au/forums/topic/9278-engine-temps/#findComment-139271
Share on other sites

I noticed after I put the FMIC in that the water and oil temps are up by about 10 degrees or so.

I'm putting in a 16 inch davies craig (or is that craig davies??? :spank: ) fan in next weekend. I don't have to, but I noticed that the clutch fan is squeaking and has a slight wobble to it !!! So I'd hate to think what it is like at 6000rpm :)

If your worried about temps, go the thermostat, then thermo fans, then oil cooler or 32mm radiator and see how you go.

J

Link to comment
https://www.sau.com.au/forums/topic/9278-engine-temps/#findComment-139301
Share on other sites

One thing I used to do in my old car cause it used to always overheat in summer, was to drill a 1/8th inch hole in the side of the thermostat so it would always bleed a bit of water through slowly.

Not sure if it was a good idea, but it worked great.

J

Link to comment
https://www.sau.com.au/forums/topic/9278-engine-temps/#findComment-139334
Share on other sites

Guest nismogtsx

In my old skyline it heated to much so i removed the thermo stat alltogether... It took the car ages to warm up but then it always stayed at 1/4 temp... basiclly just off cold..... It olny ever reached over the 1/3 area when doing a big mountain climb in summer is 2nd gear all the way at 3000+rpm all the way...

Not a good idea tho... But i need to in this model due to a very strange setup of FMIC/Radiator blah blah blah

Link to comment
https://www.sau.com.au/forums/topic/9278-engine-temps/#findComment-139358
Share on other sites

Originally posted by lowlux

yeah jay a guy at work told me to do that,he did that in his race car and it worked well, oh well ill try the colderthermostat first,if that doesent work ill drill

LOL cool, I'm glad I'm not the only dodgy person around :P

I saw a Nismo 86 degree thermostat somewhere, but they wanted about $120 or something like that for it. !!!

But then again, it did have the nismo name !!

Link to comment
https://www.sau.com.au/forums/topic/9278-engine-temps/#findComment-140135
Share on other sites

Hmmm...44deg or whatever it was in melb the other day and i was driving around a bit - temp didn't.even move past the normal level. Was quite impressed!

The standard ECU should regulate it all pretty well assuming everything else is working.

Link to comment
https://www.sau.com.au/forums/topic/9278-engine-temps/#findComment-140256
Share on other sites

I've got a pretty big front mount, oil cooler, 1 fan etc and aftermarket ecu etc and the temp sits at 75-78 depending on the outside air temp. On sunday's cruise where it was VERY stop start and 40 farkin degrees, the temp crept up to 81 but that's as high as it's gone AFAIK.

Link to comment
https://www.sau.com.au/forums/topic/9278-engine-temps/#findComment-140645
Share on other sites

Originally posted by 2rismo

I've got a pretty big front mount, oil cooler, 1 fan etc and aftermarket ecu etc and the temp sits at 75-78 depending on the outside air temp.  On sunday's cruise where it was VERY stop start and 40 farkin degrees, the temp crept up to 81 but that's as high as it's gone AFAIK.

Is that oil temp or water temp???

My oil temp was sitting on about 90 degrees while on the highway (110km/h) and sat on around 75-80 when putting around.

The oil coolers must work pretty good (Jay put's one on his shopping/wish list!!).

Link to comment
https://www.sau.com.au/forums/topic/9278-engine-temps/#findComment-140660
Share on other sites

I've got a 90mm I/C ,a 32mm PWR radiator and a big ass oil cooler. On hot days water temps reach 90-94 degrees. Normal days water temps are about 80 degrees. Don't know about winter yet.

Oil temps have never passed 90 degrees on the road. At the race track however, they've reached 120 degrees on 30+ days. I won't be happy until the water temp guage sits in the middle on 30 degrees+ track days.

Link to comment
https://www.sau.com.au/forums/topic/9278-engine-temps/#findComment-144970
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...