Jump to content
SAU Community

Recommended Posts

hey guys looking at getting these tyres, they are a semi slick, but still road legal. i know that on the road they'll get chewed up but they're mainly for a track car anyway.

has anyone tried these out? i hear that they are really good... but being a street registered tyre also, was wondering if they need to be warmed up and how they drive in the wet...

cheers

post-9092-1130639741.jpg

Link to comment
https://www.sau.com.au/forums/topic/92920-falken-azenis-rt215/
Share on other sites

Before any of the other circuit racers reply, I'll start off by saying that they're not a semi slick. They're just a very aggressive street tyre.

You don't have to take my word for it, even Falken's marketing drones advertise them in the "Passenger radial" section rather than "motorsport" section.

They're probably one of the best street tyres for track work around. Great mechanical grip, reinforced sidewalls for less flex, and because of the big tread blocks they don't overheat as easily.

Guys who've driven on them and Dunlop S03s on the track say that the mechanical grip is about the same, but the RT215s will last longer before overheating and going greasy on you.

They're a usable tyre in the wet. While they're newish, they have the same grip as a set of worn "regular" street tyres. They're something you have to be aware of if you're going to heavy brake, but not something you need to treat with kid gloves.

They do work better with a little bit of heat in them, but that's the same for any sports tyre. It doesn't take much to get them up to temp either.

However, they do wear very quickly. I had a set on my otherwise stock N15 SSS, and they lasted 11,000kms. Of course, I was doing the Old Pac 3 times a week and I didn't really need to brake with these tyres.

if you are just wanting track tyres (you said they are for a track car) i would get something else. RE55s are all the rage atm, i don't have any myself but i've tried them on a mates car and thought they were quite good. certainly better than the yoko A032Rs and much better than the old RE540s.

I am curerently going about ordering a set of RT615 for the 1/4 mile as a step up from the normal street tyres I have been using on the strip

and the price difference between the RT215 and RT615 is only a $10 difference per tyre that is for 205/50 X 15.

this is not ment as a hi jack just showing the updated version of the RT series

post-13785-1130801922.jpg

Those RT615's look pretty good for a street tyre. Don't think they'd hold up as well as the RT215's but they look like they'd be better in the wet.

If anyone's going to try them, some feedback would be great. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
×
×
  • Create New...