Jump to content
SAU Community

Recommended Posts

I was checking out greenline.jp and found their comment for the key as below:

"Discontinued. KEY01-RN010. Not suitable for vehicles fitted with Immobilizer, Intelligent Key, Electric Key or Keyless entry."

Does the Nismo key start the R34? My existing key looks to have keyless entry, but I don't use it as I have a separate alarm anyways. I should be able to get the Nismo key cut and itll work fine right?

I searched other threads and everyone seems to think so also.

I got a Nismo key for my R32 from nengun $60 delivered

but it looks like the 10 point key for new nissans is discontinued

Brand    Nismo

Category  Accessories

Nismo 8 Point Key, to suit these Nissan vehicles:

    * Siliva /180 SX S12, S13, S14

    * Skyline GTR R30, R31, R32, ECR33

    * Nissan Z31, Z32

Nismo 10 Point Key, to suit these Nissan vehicles: (Not made anymore)

    * Siliva S15 (This Key Is not made anymore)

    * Skyline R34, V35 (Car be used with the imobilizer)

Please ask if you vehicle is not listed.

so if i buy a nismo key off like nengun, and get it cut to match my R33 key, will it work fine with an aftermarket alarm etc installed or is there some kind of issue? i dont see why the key would make a difference, its just a different key....the alarm is all seperate anyway

i was after another key for my r34,

they told me the blank one wouldnt start it as its need a chip or something in it... they said i would have to order it from japan and quoted me 350 to get it and tune it to car!!!!

""back away, not today""

so if i buy a nismo key off like nengun, and get it cut to match my R33 key, will it work fine with an aftermarket alarm etc installed or is there some kind of issue? i dont see why the key would make a difference, its just a different key....the alarm is all seperate anyway

It will work on the 33 no problem , they don't have the immobiliser chip .

Some 34's do some don't , all 34 gtrs that i have seen have the chip in them .

You can buy the 34 gtr key from Nissan then have it cut to suit your lock but you will have to program it to suit your immobiliser ring , Nissan will charge you $50- 100 to do it .

How can you tell if you have an immobiliser? My key is pretty chunky, but its only got the lock/unlock buttons on it.

Its a 98 model, so I am guessing no immobiliser.

You can tell if your key has a chip in it , they are different . The best way to tell is go to a locksmith and show them your key they will know , some of them can program them as well , much cheaper than Nissan .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...