Jump to content
SAU Community

Recommended Posts

I was checking out greenline.jp and found their comment for the key as below:

"Discontinued. KEY01-RN010. Not suitable for vehicles fitted with Immobilizer, Intelligent Key, Electric Key or Keyless entry."

Does the Nismo key start the R34? My existing key looks to have keyless entry, but I don't use it as I have a separate alarm anyways. I should be able to get the Nismo key cut and itll work fine right?

I searched other threads and everyone seems to think so also.

I got a Nismo key for my R32 from nengun $60 delivered

but it looks like the 10 point key for new nissans is discontinued

Brand    Nismo

Category  Accessories

Nismo 8 Point Key, to suit these Nissan vehicles:

    * Siliva /180 SX S12, S13, S14

    * Skyline GTR R30, R31, R32, ECR33

    * Nissan Z31, Z32

Nismo 10 Point Key, to suit these Nissan vehicles: (Not made anymore)

    * Siliva S15 (This Key Is not made anymore)

    * Skyline R34, V35 (Car be used with the imobilizer)

Please ask if you vehicle is not listed.

so if i buy a nismo key off like nengun, and get it cut to match my R33 key, will it work fine with an aftermarket alarm etc installed or is there some kind of issue? i dont see why the key would make a difference, its just a different key....the alarm is all seperate anyway

i was after another key for my r34,

they told me the blank one wouldnt start it as its need a chip or something in it... they said i would have to order it from japan and quoted me 350 to get it and tune it to car!!!!

""back away, not today""

so if i buy a nismo key off like nengun, and get it cut to match my R33 key, will it work fine with an aftermarket alarm etc installed or is there some kind of issue? i dont see why the key would make a difference, its just a different key....the alarm is all seperate anyway

It will work on the 33 no problem , they don't have the immobiliser chip .

Some 34's do some don't , all 34 gtrs that i have seen have the chip in them .

You can buy the 34 gtr key from Nissan then have it cut to suit your lock but you will have to program it to suit your immobiliser ring , Nissan will charge you $50- 100 to do it .

How can you tell if you have an immobiliser? My key is pretty chunky, but its only got the lock/unlock buttons on it.

Its a 98 model, so I am guessing no immobiliser.

You can tell if your key has a chip in it , they are different . The best way to tell is go to a locksmith and show them your key they will know , some of them can program them as well , much cheaper than Nissan .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...