Jump to content
SAU Community

Recommended Posts

Hi all,

Sorry if this is a repost but I couldnt find another thread about it. When I was vacuuming under the seats last weekend I found a black cable sticking out through the floor under the driver's seat and going to somewhere to the centre console near the gearstick.

Is this common on all R33s? And anyone know off the top of their head what it is?

If noone knows I'll take a photo when I get home

Thanks

Link to comment
https://www.sau.com.au/forums/topic/93582-cable-under-the-drivers-seat/
Share on other sites

yeh, r32 has that on factory belts... if you don't have them buckled in, they light up. When you replace them for complicance, the cables are useless..

either that or spare connection for stacker when an option.

Ive heard that it is some sort of sensor for the seatbelts that is either removed during compliance or is only used on airbag-equipped cars.

Got it on my s1 an it's got no airbag :(

========================================

as others have stated, I just assumed it was the seat belt sensor that lights up the little light in the dash cluster to 'remind' you to put the seat belt on.

Predator you mentioned something like a spare connection for a stacker, I still have my 6 stacker in the boot. Could you explain for me why a spare connector would be needed coming from the floor on the drivers side?

  • 2 months later...

I just bought my first skyline (R33 GTS) last week, and when giving it a vacuum i too found these connectors under both of the seats. The one under the driver's side has 4 wires, the passenger one only has two.

Well...being slighly the fiddler...hmmm...well...maybe more than slightly...anyway... i decided to see if it was indeed a seatbelt light. I got a paperclip and shoted out the two pins on the passenger connector, and watched the dash... to my surprise there was no light that lit up, but whenever the pins are shorted, there is a clunking noise in the door pillar (where the seatbelt comes out). When the pins are un-shorted, there is another clunking (release of some sort).

After some experimenting, I found the correct two pins on the driver's side to make the 'clunk' on that side too.

Someone somewhere mentioned that they were seatbelt pre-tensioners, so that once the seatbelt was plugged in it would lock it off at the reel end. As far as i can tell though, even when the pins are shorted the seatbelt seems to move as per usual, not tighter or looser than normal. Is it possible that the solenoid is disconnected when the Australian Seatbelts are put in for compliance? I would have thought they would have idsconnected the whole lot though...hmmm...

If anyone knows anything about this, please let me know!

Edited by Samon
  • 1 month later...

Okay, a little more information on the topic...

I had the trim that is over the seatbelt reel off the other day, and thought i'd investigate a little further. There are two wires going into the seatbelt reel thingy, some sort of solenoid, and yes, shorting the pins out does make a clunk in the reel. It kinda feels like it is easier to pull out when it is shorted out, but i can't really tell... at any rate they dont 'lock it off' or anytihng, so it still beats me as to what they actaully do! :P

Samon,

I can have a guess....

Without shorting try yanking fast on the seatbelt and maybe it doesnt lock/grab...

Short it and then yank fast and maybe it does....

That's just my guess tho! LoL

.....Coz isnt there something with the Soarer's that if the cars not ON -or- seat belt plugged in that you could yank it and it wont lock... Its ment to be some sort of creature comfort thing...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...