Jump to content
SAU Community

Recommended Posts

Most of us are runing pods and larger exhausts. While others are running even bigger turbos, larger fuel pumps and different ECU tunning. Even the odd gutted cat (pack the panadol for the headaches), its not worth it.

This can change the emissions from the factory limits which should meet the Australian standards.

Any one been pulled up for an emissions check in Qld?

Anyone else from other states been pulled over by their EPA/police/Department of transport?

Did you pass or fail, did you have to get a retest?

It would be a pain in the arse to have to change all your mods back to standard, espically turbo and ECU mods.

I think it is one of those things that is just around the corner, espically looking at the cahnges to some of the import regulations

Maybe dual fuel mapping is the key ...one for emissions/fuel, one for serious power...

Link to comment
https://www.sau.com.au/forums/topic/9377-random-emissions-testing-in-australia/
Share on other sites

Hmmm. I don't think its much of an issue.. they don't do much in victoria from what i've seen and heard around. It seems like its more of a somebody makes a complaint thing they check it here.

It looks like in NSW and QLD its used largely just an excuse to get some of the high spec ones off the road. Probably the same here but i've never seen them doing spot checks.

If anything, a skyline is going to have much less emissions than older Aussie produced cars as Japan has had pretty strict regs on it for a lot longer than us.

it is an issue Ihave heard of a number of people in vic who ahve been causght and have had to take their mods out to get the car to comply if you have an epa test in victoria nd they see an aftermarket ecu even if the car passes the test the car is failed cause to is not approved. that is why I'm an advocate of the power fc and remapping ecus.

becarful guys when you do your mods this could happen to you

meggala

Regulations for cars will get tighter ; the import regulations for better or worse are an example of this…. Owning a ‘legal’ modified car will take some careful planning with mods…. I could not get over the fact an air pod is a defect ….. How many imports do you see with the standard air box.

Queensland still only requires a roadworthy on a transfer of registration. A yearly road worthy will probably be brought in at some stage like NSW & VIC (?)

Mandatory emissions testing could become part of a yearly road worthy. Random emissions testing would be a great way of getting a modified car off the road.

Japan does have high emission standards but Australia may actually focus on different pollutants and different levels. I read about an import company have a lot problems complying some of the RX7 series 6, 7,8 because (I think) in standard form they did not meet Australian standards. (The current emissions testing is also biased towards piston engines)

Meggala

What’s the go with the power FC does it piggy back onto the standard ECU? Or is it a true plug in system…. I have always thought it was a plug in ….

The Power FC would be a great option but wouldn’t it fail, as it is not the standard ECU?

Sorry about the doom and gloom post, I am not that negative really! I just don’t want modified car/performance car owners to stick their heads in the sand and get caught out big time …. Kind of like the new import regs and its attitude to modified cars …..

We need to be on the ball and keep on eye on what our ‘best interests’ are according to the bureaucrats, politicians and the domestic car industry … and like some motorcyclists organise (ie the mandatory headlights on campaign) some action when its needed….

And maybe not pull off the most awesome drift up some crowded café street with a screamer pipe and no Cat …. I know it its tempting !

:burnout: :)

Mandatory emissions testing could become part of a yearly road worthy. Random emissions testing would be a great way of getting a modified car off the road.

Hmmm, they have talked about this for many years. Even Vicroads testing has shown that there is no evidence to suggest unroadworthy cars have any bearing on accidents. It was raised before parliament at one stage. I think it is one thing that will keep coming up. My thoughts are that it will not end up being brought in due the backlash by community groups and people on lower income - the cost of owning an older car will be pushed up by too much. Quite rightly I think so too - as I spent $2000 on my first car and i just could not have afforded to pay more while at uni, etc. The cost of enforcing and regulating this each year would also be quite a cost to the government too.

I'm more a fan of regular license testing to improve road safety but that is a different issue. I know each state is different. VIC requires a RWC to transfer a car, and yet 3rd party is not compulsory - but in SA requires neither. And NSW is different again. There never will be a unified approach to it all as it really is a state based issue.

I think it is only two aftermarket intake modifications allowed in VIC but i could be wrong. So a pod and intercooler pretty much puts you over. Then it comes down to what actually comes out the other end.

PowerFC is a full replacement ECU. Still its a 15 second job to check it assuming they know what to look for...they just have to see the logo on the box for a start. I assume he meant its more capable to tune to balance emissions better with all the aftermarket gear??

Everybody gets screwed over when they decide the road rules... there is very little consultation other than with industry "groups".

They want everybody to drive a Ford, Holden, or Mitsubishi and "standard" cars or "factory engineered" local or locally imported cars. There is a lot of pressure by these companies to encourage government to force people to buy newer cars for obvious reasons.

To me though .. make a decent aussie produced car for a decent price and i will buy it.. but i can't see that happening.

Not everybody wants to spend 30k+ on a new car every 3 years and go through that "cycle".

I agree .... Once we locally start producing/importing decent cars that are realistically priced ... we will buy them .... The new XR6 is probably getting a little closer but even if you had the money to buy one you would void the warranty once you start modifying properly.

Cars in the States and New Zealand even after the exchange rate tend to be cheaper! Imports do have different compliance standards in different countries .

But I hope that wouldn't stop the import car scene all together.

If the Power FC is a straight plug and play system, you could always plug the standard ECU back in and run standard boost if you are due for your emissions test. Don't know how a different turbo or fuel delivery system would affect the ECU…

The important question is down track can Skylines Australia and other related interests groups present a united front with the import/performance industry if more stringent legislation is placed on the modified car scene.

Legislation is there for a reason, I think its great if we can have better performing safe cars which may not only meet the emission standards but exceed them (some of the tuners out there are great but some are pretty average ie max power, crap mid range and fuel consumption and only mapping a couple of points) …

What frustrates me are seemingly pointless rules such as no pods because they may effect the emissions or it is not a standard ECU even though the emissions may past the standards …

  • 5 years later...

I got pulled over last night and the guys were too lazy or didnt know how to test me instead they defected me and asked me to complete an IM240 test for emissions.

Not sure if I will pass though, aftermarket FMIC, exhaust and POD?? Apparently its pretty common though particularly in rural areas. I got done in the Hunter Valley.

I got pulled over last night and the guys were too lazy or didnt know how to test me instead they defected me and asked me to complete an IM240 test for emissions.

Not sure if I will pass though, aftermarket FMIC, exhaust and POD?? Apparently its pretty common though particularly in rural areas. I got done in the Hunter Valley.

Its becoming increasingly common in Sydney as well.

Where abouts in the Hunter did u get done? What did u get defected for?

A guy on these forums GLTOY has passed numerous emissions tests on his RB25 >300RWKW with his own tune. I think he even tuned it on E85.Just search in the forced induction thread .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...