Jump to content
SAU Community

Recommended Posts

ok peoples

I've always been curious as to this after reading peoples upgrades/mods etc etc

Lets say you have 2 turbo's. Ones a big one.. the others a small one...

Now lets say there both running 14psi or something..

If they both go into the exact same car how is it possible one turbo will make more power than the other if there both running the exact same boost level ???

I understand that the smaller one will make boost earlier.. and the larger one would hold the boost stronger.. i guess.. but I dont understand how 14psi from one turbo makes more power than 14psi from another turbo ???

14psi from 1 turbo would be the same volume of air as 14psi from a smaller turbo right???

hmmmmm

thanks :mellow:

Link to comment
https://www.sau.com.au/forums/topic/93825-turbos-output-power-hmmm/
Share on other sites

pressure does not equal volume. 35psi in car tyre is not the same amount of air of a truck tyre at 35psi. the bigger turbo will make more power as its exhaust housing is bigger, thus it can flow more air making the engine more efficient at the same base manifold pressure (boost)

this is my impression im sure other will correct me if im wrong. a small turbo will hit boots at low rpm but the boost trails off and becomes lower at higher rpm. so at 2k you might be at 14 psi but at 6k it might have fallen to about 10ish. a larger turbo will hold the psi for much longer.

oooh ok i think i get it now thanks :mellow:

so like.. if you attached e.g a balloon to both turbo's there both filling it with 14psi, but the larger turbo would fill the balloon quicker ???

pressure does not equal volume. 35psi in car tyre is not the same amount of air of a truck tyre at 35psi. the bigger turbo will make more power as its exhaust housing is bigger, thus it can flow more air making the engine more efficient at the same base manifold pressure (boost)

ok peoples

I've always been curious as to this after reading peoples upgrades/mods etc etc

Lets say you have 2 turbo's ones a big one.. the others a small one...

Now lets say there both running 14psi or something..

If they both go into the exact same car how is it possible one turbo will make more power than the other if there both running the exact same boost level ???

The easiest answer is 'RPM'.

Power = Torque x RPM / (some factor > 1)

Assume that both turbos can make their boost target at some point in the engine's RPM range,

and that the smaller one cannot hold 14psi to redline.

Assume they both make the same torque for the same airflow - the one that can hold that

same airflow (torque) to a higher RPM will make more power according to the formula. So if

the smaller turbo can't hold it's 14psi as high in the rev range as the larger one, that's less power.

The next easiest answer is 'efficiency'.

Assume that the smaller turbo _can_ hold the 14psi to redline, but that it's well out of

its efficiency island. That is, that the air comes out of it much hotter than out of the large one.

All other things being equal, the hotter air has less oxygen to burn - meaning less torque

at the _same_ 14psi and the _same_ RPM. According to the formula, that's less power.

_edit_

As pointed out by PaulR33, the turbo itself is a restriction (like a muffler). A larger turbo

should offer a lower restriction at the same RPM, thus allowing more airflow for a given

input pressure. More airflow == more torque at the same RPM, so that's more power.

I'm sure that others can express this better than me or correct deficiencies :mellow:

Regards,

Saliya

Edited by saliya

psi means nothing. airflow makes power not psi

boost is a reistriction to air. decrease the restriction, ie bigger exhaust, bigger dump, bigger cat, bigger exhaust housing the lesser the resitriction, the more air, the power. at the same psi boost level. this is because there is less restriction

psi means nothing. airflow makes power not psi

boost is a reistriction to air. decrease the restriction, ie bigger exhaust, bigger dump, bigger cat, bigger exhaust housing the lesser the resitriction, the more air, the power. at the same psi boost level. this is because there is less restriction

I think you mean 'boost is a measure of restriction' (the way I say it is 'boost is a function of

the engine's inability to deal with airflow). And I agree, it's airflow (not a given pressure) that

results in the ability to burn fuel and make torque.

But on the same motor, the restrictions should be the same (with the exception of the

turbo itself). He's not talking about changing other properties of the system to

permit more airflow at the same boost level...

Regards,

Saliya

an engine is just one big air pump... Bigger pipes... bigger pump (turbo) at the same pressure means more air is going to flow through it...

You can blow 14psi through a straw you know... Or you can blow 14psi through a 10 inch pipe.. Which one is going to let more air through?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...