Jump to content
SAU Community

Recommended Posts

I'm pretty sure HICAS works by either steering the rear wheels out of phase with the fronts to sharpen turn in response at low speeds, or in phase to reduce understeer at high speeds. They don't turn much, only a couple of degrees, but you can definitely feel the rear end moving around with the HICAS working.

Edited by Big Rizza

Big Rizza is right, it uses a combination of steering wheel angle, speed and lateral force sensors to determine the angle to set the back wheels to.

Aswell as making turning response sharper is also tries to correct oversteer, the best example of this I've seen is the gtr special top gear did. Clarkson had a big drift going and as soon as he went to correct it you could see the rear snap into place, looked cool and great for normal driving but you can see why people use lock bars :D

^^^just to clear up any misunderstandings some people might have...

That would be the Super HICAS off a gtr

HICAS found on gtst's work on the same principle, but only the rear wheels move as opposed to all four with super hicas.

Whered you get that great pic from lbfalcon??

Poombah.. HICAS found on gtst's work on the same principle, but only the rear wheels move as opposed to all four with super hicas.

Think about what you said - of course all 4 move, the front 2 are controlled by you.. the back 2 by HICAS, the main difference is the number of degrees that the rear wheels move - super hicas is up to +/-1 degree I think, vs normal hicas is only +/-0.5degrees

Links.

They can move more than 1 degree.

I think it's more like 1.5 degree normally. The R34 can do a little dance when you reset the hicas, and it moves much more than 2 degrees when it's reseting itself.

hehe the pic was one that I posted of the translation I did of the Super HICAS system which comes in R33 GTSt's. The original image came out of the R33 GTSt sales brochure.

Big Rizza is right, it uses a combination of steering wheel angle, speed and lateral force sensors to determine the angle to set the back wheels to.

Aswell as making turning response sharper is also tries to correct oversteer, the best example of this I've seen is the gtr special top gear did. Clarkson had a big drift going and as soon as he went to correct it you could see the rear snap into place, looked cool and great for normal driving but you can see why people use lock bars :D

I was under the impression that, the particular event where Clarkson had the drift going was at relatively low speed exiting a second gear corner at full throttle. I thought he was demonstrating the ATTESSA system, and he was holding the drift in second gear out of the corner until the front gripped and immediately straightened him up. I have only seen the clip once on T.V ages ago before I even had my learners, that was all I remember.

Poombah.. HICAS found on gtst's work on the same principle, but only the rear wheels move as opposed to all four with super hicas.

Think about what you said - of course all 4 move, the front 2 are controlled by you.. the back 2 by HICAS, the main difference is the number of degrees that the rear wheels move - super hicas is up to +/-1 degree I think, vs normal hicas is only +/-0.5degrees

My bad. Should've elaborated more...

I know what you said but what I meant with 'same principle' is that they both steer wheels to adjust the car :(

hehe the pic was one that I posted of the translation I did of the Super HICAS system which comes in R33 GTSt's. The original image came out of the R33 GTSt sales brochure.

So you're saying T's came with S-hicas also? If so, then I should've looked a little harder when buying my car :(

If you think of a Skyline as what its supposed to be... ie a sporty passenger car, then HICAS is awesome. If you take a corner too fast it kicks in and helps you keep the car in control and back on line.

If you're a fully sick drifter or die hard trackday warrior, then HICAS is like going on a date with a hot chick and having your mom run upto your car to give you a scarf so you don't catch a cold... ie... nice thought, but totally useless. You want to control your car one way, and HICAS wants to help so it makes your car go the other way.

ATTESA stands for "Advanced Total Traction Engineering System for All Electronic Torque Split" = torque distribution

HICAS stands for "High Capacity Active Steering" = steering

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...