Jump to content
SAU Community

Recommended Posts

got a new bov otherday, and today i wacked it on and was adjusting it, i think it was a bit loose as the idle was up and down a fair bit, anyways i took it for a spin and getting up the street it became really bad didnt really wana drive juste idle serge, only traveled 200m odd, anyways i limped it home, and tighteded it up and got it idleing normal, but i have noticed its blowing a little black smoke, as i tightened it up more, the smoke got less and less, now i DID do a search on it and i found black smoke usualy means running rich, and my car runs slightly rich but can my bov's spring tension effect how rich it can run??? im a little worried to drive it now, no performance loss or anything, all idles the same now just a slight haunt of black smoke now, any ideas?

and yes i will put original bov back on tomorro

cheers guys

Link to comment
https://www.sau.com.au/forums/topic/94085-black-smoke/
Share on other sites

atmo mate, and unless i have it that tight taht it wont vent proply and get flutter, when it was idling like a pig it vented awsome, but its that tight now i get reversion, my old bov was the same and was tuned with reversion and really tight , but it shouldnt really matter should it

Link to comment
https://www.sau.com.au/forums/topic/94085-black-smoke/#findComment-1699282
Share on other sites

Unless it's open the whole time in which case it'll do what you're saying.

Turn you engine on, open the hood and look at the bov.

Pull lightly on the accellorator cable to rev the engine and see if the bov is opening. Don't rev too hard only a little. If it's opening it's too loose.

Link to comment
https://www.sau.com.au/forums/topic/94085-black-smoke/#findComment-1700378
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...