Jump to content
SAU Community

Recommended Posts

hi all, i am thinking about selling my well setup drift AE86, it is absolutly LOADED with stuff, the whole package works fantastic, and i have finally got the power i was after out of it.

makes 150 rwkw's on 9psi.

Below is a run down of the specs, with some pics.

Chassis:

Fully seam welded with structual support added in known weak areas, rear suspension points braced and welded

rear seat brace with harness mounts

Suspension:

AE86 struts cut down 120mm with coilover sleve kit welded on, SW20 REAR cusco inserts fitted along with a 10kg/mm spring, S13 Tein Cambertops, Sigma lower control arms modified with rosejoints, crossmember pick up point modified to lower roll center, Castor rods modified to allow more castor.

current specs are 4.5 degrees neg camber, 8 degrees castor and 1mm total toe out.

Rear susp consists of Kai Power 5 link adjustable rose jointed rear end, lower arms standard length and top arms are 5mm longer to give more grip. 8 kg/mm Cusco springs with approx 200 mm free height, TRD blue 8 way adjustable shocks. 18mm whiteline sway bar with nolathane bushes all round.

Drivetrain

Silvertop 20V 4age with microtech LTX8 ecu, 'Custom Kelway manifold', T25G turbo, dump pipe made by me, Hybrid cooler, custom inlet plenum made by me to feed boost into the existing quad throttles. 1jz injectors, Exedy HD 4 puck clutch, W55 gearbox, Custom tailshaft with T18 rear end, TRD 2 way lsd with 4.1 ratio.

Assorted

random wheels from 13's 14's and 15's, Paint job done by me, front and rear gaurds handflared by me, body is an extra 40 mm wider each side. Sparco seat, TRS 4 point harness, Omori gauges. Etc etc.

Jblood front bar and TRD rear wing

blue8618ks.th.jpg

29tl1.th.jpg

Car will be sold with NO rego as its a track car but we all know with hachi's plate swaps are easy as anyway so getting rego isnt hard (not that i condone that)

also, will be sold with 15X7 front SSR reverse mesh dish wheels and rear 15X7 Advan Oni's also dished.

After reasonable offers around the 12K mark, i dont believe that this is a lot considering the 10K asking price you see on some aust spec cars which are basically still NA with sus and thats about it.

YES the car has been drifted, this car was only fully built 4-5 months ago and has NOT seen much track time at all. selling due to a few reasons which i wont share atm, but they are nothing to do with the car. i will be sad to see it go, but ive got something planned to buy for the new season.

I have vids of this car in action, its a proven competition package with me placing podium finishes in it, all it needs is a good driver as the set up is more then fine.

SERIOUS offers and enquiries to EMAIL and i WILL NOT SEPERATE PARTS so dont ask me :D

[email protected]

thanks

Edited by simon-ae86
Link to comment
https://www.sau.com.au/forums/topic/94764-fs-drift-ae86-20v-4agte-turbo/
Share on other sites

i realise that i may not get much interest from a skyline forum. but hey theres gotta be someone out there who is after a change.,.. i know i am. im getting atotally different type of car

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
    • Yes, well. Mine are less than half that. ARBs are not set to "dumb" either.
    • I would hope. But, we all know even the best companies have an issue sporadically.
×
×
  • Create New...