Jump to content
SAU Community

Asshole

Squizz

By Squizz,
in Queensland

 Share

Recommended Posts

Squizz Grand Master

Squizz

Posted
Posted

XY730

Remember that plate Ladies and Gentlemen for that is the number plate for a large white BMW touring style motorbike that decided waiting in traffic like everyone was too much to ask and did the typical biker weave and collected our front bar on the Cliosport this morning.

When confronted over the scratch the Asshole then said "What do you want me to do about it" and sped off.

Thanks dude, big help, just what I need in the morning.

Hope I see it in a carpark one day.

Link to comment
https://www.sau.com.au/forums/topic/94915-asshole/
Share on other sites
Ska Grand Master

Ska

Posted
Posted

Why the police wont do a fcukin thing! I dont mind if bikes want to go up the sides where there is plenty of room, but pushing your bike through traffic where you come very close to hitting other cars is just fcukin wrong.

I hope someone finds him, and he gets what he deserves.....

Link to comment
https://www.sau.com.au/forums/topic/94915-asshole/#findComment-1715023
Share on other sites
predator2 Enthusiast

predator2

Posted
Posted (edited)
Why the police wont do a fcukin thing! I dont mind if bikes want to go up the sides where there is plenty of room, but pushing your bike through traffic where you come very close to hitting other cars is just fcukin wrong.

bullshit.. the police for whatever reason usually do actually take these things seriously. If you don't file a police report, you can't also claim a not-at-fault claim with your insurance.

my brother had to front court for a similar thing a few years ago.. accidentally knocking a mirror off a car and getting reported for it.

so shut your cakehole.

Edited by predator2
Link to comment
https://www.sau.com.au/forums/topic/94915-asshole/#findComment-1716408
Share on other sites
R33RWKW Proficient

R33RWKW

Posted
Posted

Hi Mate, I can symphathise with you. I have been victim also. (years ago not involving my Skyline).

The Police here in VIC found him, (I only had the first 3 letters of the rego) did take it seriously, & the C**T got a visit & my car was repaired.

I was hesitant to "DOB" to the Police, but when I spent a month trying to find him myself with a can of BRake fluid & some Chlorine, I gave up & decided to end it. These Braindead Goats, just think that a scratch or minor dent is a $2 job.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/94915-asshole/#findComment-1718443
Share on other sites
gts25t4door Experienced

gts25t4door

Posted
Posted

Bikers think that they own the road, I always keep out of the way of vehicles bigger then me, maybe bikers should keep this in mind next time they pull out in front of you. I dont have anything against bike riders, but they should not think that because they are smaller and faster and can weve in and out of traffic, that if they cause damage to peoples cars even a scratch that they are just as in the wrong as if I were to run into another car, only they can speed off easier.

I say "DOB" the bugger in.

My 2c.

Chris

Link to comment
https://www.sau.com.au/forums/topic/94915-asshole/#findComment-1719339
Share on other sites
600ZILLA Community Regular

600ZILLA

Posted
Posted

A friend in Brisbane witnessed a Biker come straight off his bike the other day smashing a fair amount of his bike off in the process of pushing through traffic.

Anyone have a Magic Voodoo Bike for XY730 that we can give a kid to play with ?

Link to comment
https://www.sau.com.au/forums/topic/94915-asshole/#findComment-1719716
Share on other sites
ZOR Experienced

ZOR

Posted
Posted
A friend in Brisbane witnessed a Biker come straight off his bike the other day smashing a fair amount of his bike off in the process of pushing through traffic.

Anyone have a Magic Voodoo Bike for XY730 that we can give a kid to play with ?

where did this happen?

i saw a susuki gsxr 1000 pushing through traffic and smashed into the wall on the m1 near the city. the other day

Link to comment
https://www.sau.com.au/forums/topic/94915-asshole/#findComment-1720375
Share on other sites
Oz Grand Master

Oz

Posted
Posted

mmmmm always nice to run into a biker @ the lights,

dead shit stalled his bike trying to take off hard I was taking off hard too after him, busted his rear light & chain tensioner cogs clean off :)

at lest I stoped & asked if he was ok he just told me to f**k off :) its nice when u get to drive a friends patrol ute with a chev 6.5ltr turbo deisel :) all I can say to all the dead shits out there that do ride up the middle while the traffic is moving I hope to see u under my wheels reall soon..... &R.I.P~!~!~!

REST IN PIECES

Link to comment
https://www.sau.com.au/forums/topic/94915-asshole/#findComment-1721958
Share on other sites
The Dan Grand Master

The Dan

Posted
Posted

Any bike that lane splits when I'm up front gets a rude shock when the lights go green. Report the plate....take the f**ker down.....then laugh at him when you see him again.

You are lucky it was in the Cliosport coz if you told the police it was in your skyline...NOTHING would have been done. Cops don't give a shit, never have and never will.

And no amount of cake can shut my hole on that topic.

Link to comment
https://www.sau.com.au/forums/topic/94915-asshole/#findComment-1729293
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      All I hear is ROADTRIP!
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...