Jump to content
SAU Community

Recommended Posts

First off, I really do apologise if this has been covered before, I tried the search function for about 30min and found nothing of help to me.

I recently bought my first Skyline, also my first Turbo car. Absolutely amazing to drive. The suspension is far from standard, adjustable, I believe but am yet to confirm as coilovers. Exhaust is awsome, nice low growl, non intrusive, immaculate interior etc. Sorry this is all irrelevant, I'm just soo happy with the car :)

Engine is 100% stock. I've read alot here about people buying cars with idiotic and dangerous engine mods, mine is, as far as I can tell and see, completely standard.

Problem is this, although I don't know if it's a problem or not, hence the question :)

The temp the coolant runs at has be worried a little. My cars before this were a 5speed VL (RB30), and an N14 Pulsar. Both ran at about 33% of the temp gauge for normal operation. The Skyline runs at about 60-66% of the temp gauge.

I checked the coolant, it was dirty dirty brown and stunk like sh!t. I did my first radiator flush/refill on it, gotta learn somehow I guess heh. Was cumbersom, but after a few hours and a few stops to check coolant level, I got it sorted and now the level is fine and overflow is fine. However; Temp still sits on 60-66% of the gauge. The other issue I'm worried about is the fact that after about 2-3 hours of being off, the engine retains a rather large amount of heat. I just stopped in at a mates for 2 hours, gauge was at normal 60-66% reading when turbo timer turned the car off. Got back in 2 hrs after it turned off, gauge was still at about 45% reading before I kicked her over. Quickly heated back up to around 66% and sat there as it always does.

I'm really concerned, this is probably the most idiotic, newbie question ever asked, but I am so happy with the car and if anything is wrong I really want to know fast so I can get the thing fixed and continue to enjoy the brilliant drive :) If nothing is wrong, call me a moron and I'll still be happy :)

Please, let me know if this is normal operating temperature and/or normal temperature decay (as in the engine as a rule retains heat this way for everyone), or if it's fine and I can stop worrying.

Just a note: Tonight, after the 2 hrs stop, I popped the bonnet before I started her to see if maybe the engine was cool, and maybe the sensor for the temp gauge was faulty, but the actual engine (rocker cover, inlet manifold etc) was still very warm.

Thanks in advance and apologies for the long repetetive post. I'm tierd and concerned :)

Regards,

Ben.

Link to comment
https://www.sau.com.au/forums/topic/95540-operating-temp-for-rb20det-in-r32/
Share on other sites

It's not an idiotic question - the only idiotic question is the one you DON'T ask. So I'd say that doesn't make you a moron.

When you popped the bonnet, you would have noticed that it's pretty crowded in there. So there's not much chance for fresh air to circulate and take away a bit of heat.

As for the gauge, the needle sits probably around half way at least under normal conditions. So what you see is probably normal.

The skylines temp guage is designed in such a way to prevent you worrying.

~Half on the guage is anywhere from ~70degree's right up to a shade over 100degree's.

The guage is decieving, if you look again and judge the position of the needle from the actual H mark you will see it is pretty much spot on 50%. The little line that goes up to 3/4 makes it look more. :)

The skylines also warm up very quick, mine takes no less than 1-2km's.

It's not an idiotic question - the only idiotic question is the one you DON'T ask. So I'd say that doesn't make you a moron.

When you popped the bonnet, you would have noticed that it's pretty crowded in there. So there's not much chance for fresh air to circulate and take away a bit of heat.

As for the gauge, the needle sits probably around half way at least under normal conditions. So what you see is probably normal.

So, it's crowded in there and the heat decay being really slow is normal.

The heating up quick (1-2kms, that's pretty much what mine does) is normal too!!

I love you guys :)

Thanks heaps.

If its a little slow warming up its probably running an aftermarket thermostat. They open much earlier and wider than the genuines.

The genuine thermostats open smaller amounts and are also slower closing.

In VL Commodores I've found aftermarket thermostats to cause slight over heating if hammering up a long hill with the a/c on at 1/2 throttle (Willunga Hill = Big arsed Hill).

The Genuines run the car slightly warmer but hold a much more consistent temperature without the horrible overheats up Willunga Hill.

I've never bothered with an aftermarket in the Skyline, I do know of one that keeps quite cool and often seens track days without overheating hiccups. So I'd assume an aftermarket thermostat (cheapy) in the Skylines works quite well.

I have fitted an aftermarket temp gauge a couple of months ago. Since then I have noticed my car go over 100c on several occasions (mainly 30c days).

It sits anywhere from 70-105 (cold to hot days).

Is this normal or is it cooking itself to death ? :D

konect, sounds very much like mine.

For it to hit 105degree's you do have to be in some pain in the arse stressfull peak hour traffic with the a/c on and a hot day.

Hit the AMB button, you will freak at the air temps. 60degree's is not uncommon. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...